Integrated vibration temperature probe

ZW-2AIntegrated vibration temperature probeIt is a highly integrated instrument that combines a temperature sensor and a vibration sensor into one, which can simultaneously measure temperature and vibration. Then, the transmitter and sensor are integrated into one, and the temperature and vibration values are output as corresponding two-wire 4-20mA signals. It can be directly connected to PLC or DCS systems. The product has a reasonable design, simple structure, stable performance, and easy use, making it an excellent choice for fault monitoring of factory equipment such as fans.

ZW-2AIntegrated vibration temperature probeTechnical parameters:

1. Frequency range: 5-1000Hz

2 Measurement range: Vibration part 0-200um (peak to peak)

Temperature range from 0 ° C to 100 ° C

3 signal output: 4-20mA (± 0.05mA)

4 Output impedance: ≤ 500 Ω

5 Working voltage: DC24V ± 10%

6 Wiring method: Vibration two-wire brown+24V black 4-20mA

Temperature two-wire blue+24V gray 4-20mA

7 measurement directions: horizontal or vertical direction

8. Operating environment: Temperature -30 ℃~80 ℃, relative humidity ≤ 90%

9. Dimensions: 32 * 60mm

10 Installation specifications: Customized by customer

Bottom installation thread: M8 × 1.25 × 10

11 Weight: Approximately 500g

Attention: The shielded wire should be grounded

Precautions

1. The vibration temperature probe should be protected from severe impact and knocking.

During transportation and storage, it should be placed in a dedicated packaging box.

SMJ-ZWThe vibration and temperature monitoring instrument is a simple and efficient tool for on-site equipment monitoring, control, and analysis. It is mainly used for monitoring and protecting large machinery and rotating equipment from excessive vibration during continuous operation. It can avoid equipment damage and personnel injury caused by equipment malfunction and increased vibration amplitude. It is an essential monitoring instrument for equipment maintenance and upkeep. During user use, control values can be set based on the allowable vibration level of the device. When abnormal phenomena occur during the operation of the equipment, the vibration value increases and exceeds the set value（SPWhen the value is reached, the alarm indicator light will turn on. If the continuous overshoot time exceeds the set delay time, a second-order alarm will be triggered（SP2TheSP4Warning green lightSP1TheSP3The alarm red light indicator light is on, and at the same time, the internal relay of the instrument is working, which will effectively control the main power supply of the equipment, prevent accidents, and achieve the purpose of protecting the equipment.The transmission output can be directly connectedDCSThePLCOr other devicesFor the convenience of on-site installation, wall mounted or cabinet mounted installation is adopted. This product has the characteristics of dust prevention, small size, reasonable structure, stable and reliable performance, and accurate action.