Tableau GAUGE. X laser caliper

The Xactum intelligent laser caliper can be placed on a workbench and operated as a caliper, quickly and accurately measuring diameters. It is very suitable for detecting inserts, grinding completion, or operators who do not require special professional training. Repetitive accuracy can easily achieve this state.

Tableau GAUGE. X laser caliper

XLS laser caliper with exclusive application software program and complete

Including a display, remote control, workpiece fixture, and a base platform that can be placed on a workbench to fix the caliper:

You can use this "Table Gauge" mechanism combination to obtain accurate measurements of workpiece diameter, roundness, and concentricity after grinding or lathe machining in a small amount of time. Prior to this, obtaining these precise data requires the use of many expensive instruments and equipment by professional technicians in the laboratory.

Aeroel functional features

·The scanning motor uses liquid state bearing (FDB) technology, which eliminates the wear problem of ball bearings and improves the functionality of the scanning motor.

·NO-VAR optional software can automatically compensate for the expansion problem caused by temperature changes in the material of the tested object when the ambient temperature changes.

Users only need to edit and input the specific thermal expansion coefficient of the tested object.

·Allow Ethernet connection in the network server, using any web browser to connect to this laser caliper, just like setting up a 'see it' website. On this website, you can view measurement data, set up and edit applications that may have been installed after opening, and even display video signals (light pulses) for this laser caliper.

Tableau GAUGE. X laser caliperSystem architecture and composition

Table Gauge x Basic Sampling System Composition:

·Single axis Xactum laser caliper, XLS40 or XLS80.

·Built in laser caliper Table-Guge.X software

·Multi color LED display DM-100

·Universal power supply.

·Infrared remote control.

·Fix the monitor bracket.

·The base platform of the fixed laser caliper.

Optional features and accessories:

·V-shaped storage block.

·Precision linear slides and fixed caliper bases for fixing and moving workpieces.

·Place the fixed V-shaped storage block on the slide rail.

·A pair of center pin/cone fixtures placed in adjustable positions on the slide rail.

·Foot switch.

·Handheld Super Terminal

·GageXcom PC application software.

Measurement type

The caliper can measure the diameter D value of the object being measured and the measurement area

The distance C value from the centerline to the center point of the measured object.

The tested object can be opaque or transparent.

Measurement time (or measurement frequency) can be programmed to set the average number of scans to achieve the required repeatability accuracy and resolution.

Measurement mode

Free running diameter measurement method:

By placing the tested workpiece onto the fixture, continuous readings of the diameter value can be displayed on the monitor.

Select Auto sync mode:

After placing the tested workpiece in the measuring position, the diameter value will be displayed when the caliper receives this command and calculates the measurement.

The measurement data on the monitor screen will remain frozen until the measured workpiece is removed.

On command measurement method: In this measurement method, the average diameter value, maximum value, minimum value, and deviation value=maximum value - minimum value can be obtained. The Start/Stop measurement method command control can be performed remotely (via Ethernet/RS232) or by pressing and holding the SET button on the display, or through digital input connection. The Start/Stop measurement method can also be executed through the optional foot switch, allowing both hands to easily control the measurement of the workpiece.

Single diamond mirror scanning: In all measurement modes, it is possible to use only a single diamond mirror to remove the edge jitter of the scanning plane; When this function is activated, the scanning frequency automatically decreases to 125 Hz.