- Phone
-
Address
Building 6, No. 93 Guoshun Road, Nanqiao Town, Fengxian District, Shanghai
Product Categories
Shanghai Maoshuo Machinery Equipment Co., Ltd
Swiss VAT vacuum valve 01032-KE01-0002
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Swiss VAT vacuum valve 01032-KE01-0002 $r $n model analysis (VAT standard naming) $r $n code segment meaning $r $n01032 series: small-diameter high vacuum angle valve (economy type) $r $nKE01 flange type: ISO-KF16 (DN16) $r $n0002 configuration: pneumatic actuator+mechanical position indicator
Product Details
Swiss VAT vacuum valve 01032-KE01-0002
1. Model analysis (VAT standard naming)
| code snippet | meaning |
|---|---|
| 01032 | Series: Small caliber high vacuum angle valve (economical type) |
| KE01 | Flange type: ISO-KF16 (DN16) |
| 0002 | Configuration: Pneumatic actuator+mechanical position indicator |
2. Core parameters
| parameter | specification |
|---|---|
| vacuum range | 10⁻⁸ ~ 1000 mbar |
| leakage rate | ≤ 1 × 10 ⁻⁸ mbar · L/s (fluororubber seal) |
| Valve body material | Stainless steel 304 (electrolytic polishing) |
| Sealing options | Fluororubber (standard)/Metal seal (optional) |
| Drive Type | Single acting pneumatic (spring reset) |
| response time | ≤ 0.5 seconds (on/off) |
| temperature range | -20 ℃~150 ℃ (standard type) |
3. Structural characteristics
compact design：
The total length is only 85mm (including actuator)
Weight 0.8kg
Visual indication：
Red/Green Mechanical Position Marking Window
Economic optimization：
Simplified version of corrugated pipe structure (lifespan ≥ 10 ⁵ cycles)
4. Typical applications
laboratory equipment：
Gas path control of vacuum coating machine
Freeze dryer isolation valve
medical equipment：
Mass spectrometer injection system
5. Installation requirements
flange connection：
Torque limit: 4 Nm (ISO-KF16 clamp)
Sealing ring: Fluororubber O-ring (P/N: VAT-OR16)
Gas path configuration：
Drive air pressure: 4-6 bar, clean and dry air
Gas consumption: 5 cm ³/time
6. Electrical interface (optional)
| terminal | function |
|---|---|
| 1 (Blue) | Electromagnetic valve common end |
| 2 (Black) | Valve opening signal (24V DC) |
7. Maintenance points
| project | cycle | operation |
|---|---|---|
| Sealing ring replacement | 2 years | Use specialized installation tools |
| Bellows inspection | 50000 cycles | Helium leak detection test |
| Lubrication and maintenance | 1 year | Coating with vacuum grease (VAT-GL100) |
8. Fault handling
| phenomenon | Possible reasons | countermeasure |
|---|---|---|
| Valve does not operate | Spring stuck | Manual operation lever reset |
| Vacuum degree decreases | Seal ring aging | Replace sealing kit (P/N: 01032-SK01) |
| The actuator is leaking air | Wear of piston seal | Replace cylinder seal (P/N: VAT-AS16) |
9. Comparison of alternative solutions
| Brand | differentiating points |
|---|---|
| VAT 01034-KE01-0002 | Higher vacuum level (10 ⁻⁹ mbar) |
| Pfeiffer EVR 116 | Electric drive, price+40% |
| SMC VQZ2150-01 | Industrial pneumatic valve, not suitable for high vacuum |
delivery cycle：
Standard model: 8 weeks
Metal sealed version: 12 weeks
This model is recommended for use withNon plasma environmentThe conventional vacuum system. If needed forsemiconductor equipmentIt is recommended to upgrade to the 01034 series all metal sealed version. It is recommended to choose VAT for the matching solenoid valve52X-16Series.
Swiss VAT vacuum valve 01032-KE01-0002
Similar Product Recommend
