Super constant temperature circulating water bath 601

one、Super constant temperature circulating water bathScope of application:

Super constant temperature circulating water bath 601Suitable for precise constant temperature direct heating and auxiliary heating in science such as biology, chemistry, physics, plants, and chemical engineering.

IISuper constant temperature water bathstructure：

The structure of this super constant temperature water bath is a metal rectangle, with a carefully crafted shell made of cold-rolled steel plate, a stainless steel inner tank, a digital temperature controller, a power supply, and a water pump all installed in the control box.

IIISuper constant temperature circulating water bath 601Main technical parameters:

1Power supply voltage: AC220V ± 10%

2Heating power: 1000W

3Temperature control range: RT --99.9 ℃

4Temperature control accuracy: ± 01℃

4、 Usage:

Before use, please carefully read the instructions, familiarize yourself with the instrument and control panel, and use a megohmmeter to measure whether there is poor insulation or short circuit in the power supply, plug, and grounding. This constant temperature heating solution uses distilled water and prohibits the use of river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the constant temperature sensitivity

5、 Set temperature:

Press the SET key to set or view the temperature setpoint. Press the SET key once and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, and press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state. Once the temperature setting is complete, the heating and circulation pump switch can be turned on. If the temperature controller is intelligent, a separate temperature control manual should be attached. If you need to open a second studio for experiments, you need to connect the external circulation device with a high-temperature resistant plastic tube. After the temperature is constant, turn on the circulation pump switch to start the experiment.