Strong flavored sesame oil high shear grinding and dispersing machine

The grinding and dispersing machine adopts German Bergmann double end faceMechanical seals can operate continuously for 24 hours while ensuring cooling water. However, it is difficult for ordinary emulsifiers to operate continuously for a long time, and ordinary emulsifiers cannot withstand high-speed operation. It can handle a large amount, operate more smoothly, and is easier to disassemble and assemble. It is suitable for industrial online continuous production, with a narrow particle size distribution range and good dispersion effect.

China is rich in strong aroma oil, but the current production process of strong aroma oil is complex. The flavor substances of the strong aroma oil produced by the physical and chemical reactions of proteins, reducing sugars, and lipids are mainly formed in the high-temperature steaming and frying process of the oil. However, the high-temperature steaming and frying process of oilseeds has certain drawbacks. Uneven steaming and frying time and temperature can cause deformation of oilseed proteins, resulting in a decrease in the nutrition of sesame meal, making it difficult to achieve standardized production in this process. The sesame cake after pressing for oil contains protein, cellulose, various vitamins, minerals, and lignans. These problems have led to unstable product quality, low extraction rate, and high cost in the existing strong aroma oil market, which urgently need to be solved.

A method for preparing strong flavored sesame oil using a Shanghai Sijun grinding and dispersing machine, comprising the following steps: washing, soaking, filtering, and rinsing sesame seeds to obtain a material; After naturally drying one material, it is sent to a drum type drying and frying equipment for drying, heating, roasting, and then microwave steaming to obtain the second material; The second material is processed by a Shanghai Sijun grinding and dispersing machine and then sent to a vertical hydraulic oil press for pressing to obtain crude oil; The crude oil is naturally settled and filtered using a plate and frame filter press at room temperature to obtain strong aroma sesame oil.

What are the benefits of using SGN equipment? It has good effects (grinding effect, homogenization effect, dispersion effect, emulsification effect...), fast speed, and high efficiency. Each device has multifunctional modifications, replacing different modules according to different requirements. What else is low energy consumption? According to customers who have used Yiken's equipment, they can save a lot on electricity bills. How to choose a suitable device, will definitely make a wise choice!

In order to achieve a large energy input, SGN adopts the method of increasing the speed of the stator and rotor. On the premise of fixing the motor at 3000 revolutions per minute, we adopt a vertical structure and accelerate it to 15000 revolutions per minute through a belt. This is easy to achieve, but what is important is whether other components can maintain stability at high speeds - whether the strength of the bearings is sufficient, whether the mechanical seal will be damaged or leaked due to the generation of a large amount of heat, whether the spindle will be polarized severely, and whether there will be friction between the stator and rotor. These are the concerns that customers should pay attention to when selecting.

SGNWet grinding is a type of ultrafine grinding machineryThe ultrafine grinding equipment with development prospects and high energy utilization rate differs from ordinary grinding machines in mechanism: the input power of the wet mill directly drives the grinding medium at high speed to achieve the purpose of grinding the material. The wet mill is equipped with a high-speed grinding and dispersing working disc, and the high-speed rotation of the wet mill causes irregular rolling and centrifugal motion of the grinding medium and material throughout the working chamber, resulting in a dual effect of mutual impact and grinding between the grinding media, making the material finer and uniformly dispersed. Compared with ordinary grinding machines, SGN wet grinding machines have the following characteristics:

(1)High speed and high medium filling rate enable the wet mill to achieve * power density, thereby greatly reducing the grinding time of fine particle materials and achieving energy utilization efficiencyHigh;
(2) The use of small-sized grinding media greatly improves the grinding efficiency of fine materials and can efficiently grind materials to below 1 μ m, even at the nanometer level;
(3) The product has a uniform particle size distribution and is easy to adjust. It can dissociate along the crystal plane and easily obtain ultrafine and low pollution products;
(4) The structure is simple, the operation is easy, the mechanical vibration is small, the maintenance is simple, and the price is low.

GMD2000Strong flavored sesame oil high shear grinding and dispersing machine

Grinding and dispersing machine is a high-tech product composed of colloid grinding and dispersing machines.

The first level consists of three-level sawtooth protrusions and grooves with increasing precision. The stator can be infinitely adjusted to the desired distance between the rotors. Under enhanced fluid turbulence. The groove can change direction at each level.
The second stage is composed of a stator. The design of the dispersing head also effectively meets the needs of substances with different viscosities and particle sizes. The difference in the design of the stator and rotor (emulsifying head) between online and batch machines is mainly due to the requirements for conveying performance. It is particularly important to note that the difference between coarse precision, medium precision, fine precision, and other types of working heads is not only the arrangement of rotor teeth, but also an important difference in the geometric characteristics of different working heads. The width of the slot and other geometric features can alter the different functions of the stator and rotor working heads.

​

The following is a model table for reference: