Stick imprint detector

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This device is designed and manufactured according to the ceramic tile stick printing detector described in GB/T48517-2025. Used to measure the depth of valleys within 300mm of the edge of ceramic tiles.

Product Details

、Overview

This device is based on the ceramic tiles described in GB/T48517-2025Stick imprint detectorDesign and production. Used to measure the depth of valleys within 300mm of the edge of ceramic tiles.

2、 Instrument components

1Digital dial indicator x 3

2Base x 1

3Reference board x 1

4Hand tighten screws x 3

3、 Installation and use

1Insert three digital dial gauges into the three mounting holes of the cylindrical gauge holder on a base, and then use hand screws to screw them into the threaded holes on the side of the cylindrical gauge holder. Tighten the dial gauge shaft neck to fix the dial gauge, as shown in the following figure:

2Turn on the power on the three dial indicators, and place the detector installed as shown in the picture vertically with the dial indicator pin facing downwards on the reference plate. At this time, each dial indicator will display a non-zero reading. Press the zero button on each dial gauge to reset each dial gauge to zero.