Fully automatic high-temperature specific heat capacity tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The BRR-V fully automatic high-temperature specific heat capacity tester is a hybrid testing method that uses computer technology to automatically test the specific heat capacity of solid materials at different temperatures. Widely used in scientific research and teaching for testing and researching the specific heat capacity of solid materials. During the experiment, the sample is first hung in a tubular heating furnace and heated to the experimental temperature, and then dropped into a calorimeter. The temperature changes of the sample and calorimeter are collected by a computer measurement system throughout the process. Finally, determine the specific heat capacity of the material. An atmosphere system is required for samples that are prone to oxidation at high temperatures. Meets the requirements of GJB 330A-2000 Solid Material Specific Heat Capacity Testing Method standard. All instruments of this type are tested

Product Details

BRR-VFully automatic high-temperature specific heat capacity tester

an introduction to:

BRR-V Fully automatic high-temperature specific heat capacity testerIt is a mixed method test that uses computer technology to automatically test the specific heat capacity of solid materials at different temperatures. Widely used in scientific research and teaching for testing and researching the specific heat capacity of solid materials. During the experiment, the sample is first hung in a tubular heating furnace and heated to the experimental temperature, and then dropped into a calorimeter. The temperature changes of the sample and calorimeter are collected by a computer measurement system throughout the process. Finally, determine the specific heat capacity of the material. An atmosphere system is required for samples that are prone to oxidation at high temperatures. conform toGJB 330A-2000Standard requirements for testing specific heat capacity of solid materials. All measurements and controls of this type of instrument are computer-controlled, reducing human error and improving testing accuracy.

technical indicators

1.Specific heat capacity range:0.05-5(kj/kg*k);

2.Testing accuracy:Solid ≤1%±0.002； Powder ≤2%±0.002；

3.temperature range:100800℃, heated with resistance wire,The heat capacity of the calorimeter is approximately1000J/K,atmospheric environment

2001350℃ is heated using silicon carbon tubes, and the heat capacity of the calorimeter is about1500J/K，Argon protection；

4.Sample requirements:Solid sample size, （φ11φ14）×（2040）mmPowder about6（cm3）；

5.Calorimetric resolution:0.001℃；

6.Experimental Method:Mixed method;

7.power supply:220V/50Hz, 3KW；

8.Instrument configuration:One host, one set of software, one set of communication interface and data cable, one high-precision constant temperature water bath, and one desktop computer (configured according to the contract);

9.Measurement and control method:Adopting intelligent technologyPIDAdjustment, fully automated computer testing, data processing, and the ability to generate and print inspection reports.