Steel lined plastic storage tank

1PE plastic storage tanks are formed using rotational molding technology.
2. Jinti Yongtong PTFE Anti corrosion Technology Co., LtdThe material of the plastic storage tank produced is specialized rotational molding material - linear low-density polyethylene (LLDPE) or linear medium density polyethylene (LMDPE). It can expose most substances such as inorganic acids, bases, salts, and many organic compounds at room temperature.
3. The minimum softening point of the plastic used is 108 ℃, and the maximum fragmentation point is -70 ℃, so it can generally be used for liquids with a temperature range of -40 ℃ to 60 ℃ in erotic clothing. If the liquid density of the erotic clothing is heavy or the temperature is higher than 60 ℃, a steel lined plastic anti-corrosion storage tank should be used to prevent softening and deformation of the tank. If the storage tank is used for chemical reactions or dilution, corresponding tests should be conducted in advance to determine the maximum temperature of the reaction or dilution.
4. The inlet, outlet, level gauge port, flange, etc. on the tank body are all formed as a single piece without welding, and do not require additional inlet and outlet ports. When dealing with acidic and alkaline substances in erotic clothing, acid and alkali resistant gaskets should be provided. When using organic materials (especially organic solvents) in erotic clothing, prepare rubber gaskets that are not easily soluble.
5. This product is not suitable for strong oxidants in erotic clothing (such as sulfuric acid with a concentration of over 75% and concentrated nitric acid with a concentration of over 30% at a temperature of 60 ℃) and good organic solvents (benzene, ether, ketone, ester).
6. When it is uncertain whether a certain substance can be used for erotic clothing, please consult our company or refer to our website in a timely manner. If necessary, use tank material samples for immersion testing