Stainless steel desulfurization pipe purification pipe - Dalian Ripley

Stainless steel desulfurization pipe purification pipe - Dalian Ripley

Purification series products

Introduction:

Stainless steel desulfurization pipe purification pipe - Dalian RipleyIt is a necessary product for removing corresponding impurities from laboratory carrier gas, sample gas and other gas sources. According to customer needs, it can remove gas impurities such as water, oxygen, carbon monoxide, carbon dioxide, hydrocarbons, sulfides, etc. from carrier gas or sample gas, improve gas purity, extend instrument service life, improve experimental results, and meet customer experimental requirements.

Transparent deoxygenation tube

Product Information

·The transparent deoxygenation tube is equipped with an efficient metal palladium deoxidizer, which can effectively remove oxygen impurities from high-purity gases such as nitrogen, hydrogen, and argon at room temperature. Make the residual oxygen content less than 0.01ppm.

·Material: The transparent deoxidizer tube is divided into two layers: the inner tube is made of high boron glass, which does not contaminate the medium gas, and the outer tube is made of organic glass, which effectively protects the deoxidizer tube from falling and shock, and is transparent and visible to judge the use of the deoxidizer tube.

·Operating pressure: 0-0.5Mpa;

·Medium gas flow rate: 0-2L/min;

Purification tube

Product Information

·The purification tube is equipped with high-efficiency molecular sieves and color changing silicone gel, which can effectively remove moisture from nitrogen, hydrogen, argon or other sample gases at room temperature. Make the residual moisture content less than 0.01ppm.

·Material: The purification tube is made of 5mm thick organic glass material, which is stable and widely used in laboratory related products. It is non-volatile and does not pollute the medium gas.

·Operating pressure: 0-0.5Mpa;

·Medium gas flow rate: 0-2L/min;

·Purification tubes can be customized in length and interface size according to user requirements.

Stainless steel deoxidation tube

Product Information

·Stainless steel series products can be used not only at room temperature but also at high temperatures. If there are temperature requirements for the medium gas, stainless steel series products can be used to remove corresponding impurities.

·Material: The entire body is made of 304 stainless steel with a wall thickness of 1.5mm. This material is stable and widely used in laboratory related products. It is non-volatile and does not pollute the medium gas.

·Operating pressure: 0-1Mpa;

·Medium gas flow rate: 0-2L/min;

·Note: If customers have high voltage customization needs, corresponding products can also be customized according to their needs

Stainless steel hydrocarbon removal pipe

Product Information

·Room temperature stainless steel hydrocarbon removal tube, equipped with polymer adsorbent, can effectively remove constant hydrocarbon impurities in the medium gas, such as hydrocarbon impurities in high-purity gases such as air and oxygen. Make the hydrocarbon impurities in the export gas less than 5ppm.

·Operating pressure: 0-1Mpa;

·Medium gas flow rate: 0-500ml/min;

·The heating type stainless steel dehydrogenation tube is equipped with an efficient dehydrogenation catalyst and needs to work under high temperature conditions, so it needs to be used in conjunction with a regeneration furnace. The heating type hydrocarbon removal tube mainly removes hydrocarbon impurities from the air, regardless of the hydrocarbon content in the air. The lower the flow rate, the better the effect. The hydrocarbon content of the gas after high-temperature treatment can be less than 0.01ppm.

·Working temperature: 350 ℃;

·Operating pressure: 0-1Mpa;

·Medium gas flow rate: 0-500ml/min;

·Note: If customers have high voltage customization needs, corresponding products can also be customized according to their needs