Spiral bevel gear reducer

Spiral bevel gear reducerStructural Form Description
The output shaft of the bevel gear reducer is perpendicular to the input shaft and consists of two stages of helical gears and one stage of bevel gear, which is the same as the k series reducer.
1. GK type: Foot installation, solid output shaft
2. GKF type: B5 flange installation, solid output shaft
3. GKA type: shaft mounted, with a hollow output shaft
4. GKAF type: B5 flange installation, output shaft is a hollow shaft
5. GKAB/GKHB type: using GK type box, the output shaft is a hollow shaft
6. GKAZ type: B14 flange hollow shaft installation
7. GKH type: hollow shaft locking plate installation
8. GKHF type: B5 flange hollow shaft locking plate installation
9. GKHZ type: B14 flange hollow shaft locking plate installation
10. GKAT/GKHT type: a derivative type that adds anti rotation arms and other accessories to GKA/GKH type
11. GK.. SZ. AD. type: Input shaft type reducer
12. GK.. R type: Spiral bevel gear reducer andR-series helical gear reducerThe combination of
The external structure corresponding to the above models is detailed in the dimensions of the K series reducer

Method for representing the model of spiral bevel gear reducer
G KFA67 - Y0.37 - 8P - 102.62 - M4 - B - 180°- ②
1. G is the company code
2. KFA67 represents the model and specification number (parameters can be found in the electronic sample of Guomao G series helical gear reduction motor)
3. Y0.37 is the motor code and power
4. 8P is the number of motor stages, usually including 2P, 4P, and 6P
5. The transmission ratio is 102.62
6. The installation form is M4 (see the installation form legend of spiral bevel gear reducer in the figure below)
7. The direction of the output shaft or output flange is in the B direction (see the installation form legend in the figure below)
8. The direction (angle) of the motor junction box is 180 °, as shown in the diagram below for the position representation of the motor junction box
9. The inlet position of the K series reducer junction box is ②, refer to the following diagram for the representation method of the motor junction box inlet
Note: 1. Please indicate when connecting flanges are required
2. Input shaft type without motor components
When the direction of the junction box is not specified, the bevel gear reducer defaults to the 0 degree position in the installation form. When the position of the inlet is not specified, it defaults to the X position.
4. For users who have special requirements for the rotation direction of the output shaft and input shaft of the bevel gear reducer, please contact the technical department of Guomao reducer group (technical support:) and provide a diagram or text explanation when placing an order (sales phone:)
Installation form legend of bevel gear reducer (related link: Installation and use of helical gear reducer)

Motor junction box and inlet representation method for bevel gear reducer

Related links of the same series

K series gear reducer