Product Categories

Shenzhen Yimai Optoelectronics Co., Ltd

E-mail
Phone
Address
L19-005, Building L19, South China International Leather and Leather Raw Material Logistics Zone (Phase I), No.1 South China Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen City

Contact Now

Spectral Color Temperature Illuminometer

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The spectral color temperature and illuminance meter is driven by high-performance ARM and FPGA dual controllers, with built-in image algorithms and a 16 bit ADC. It has a UART interface that supports high baud rates, TTL pins for trigger input, output, and analog output, making it easy to integrate into various devices. The USB interface adopts virtual serial port mode (VCP), which does not require driver installation and can be used just like a regular serial port, greatly simplifying the difficulty of use

Product Details

光谱色温照度计

　　Spectral Color Temperature IlluminometerThe USB transmission frame rate of this product can reach over 1000fps, and the compact and sealed spectral sensor greatly improves the stability of the spectrum. The circuit adopts multiple filtering and anti EMI interference design, which can greatly enhance the anti-interference ability in complex environments. The onboard memory can conveniently store and read the corresponding configuration data.

Order models: SPM-C1288, 0SP1288.

Key Features:

1. Small size, ultra compact and sealed spectral sensor;

2. High sensitivity, wide spectral range, low noise processing;

3. TTL interface, supports high baud rate UART, triggers input and output;

4. Analog voltage output, controllable hernia lamp;

5. Anti interference design, suitable for complex environments with strong interference;

6. Support secondary development, provide SDK source code, and open communication protocols;

7. Before leaving the factory, use an atomic lamp to calibrate the wavelength of the module, so that the module outputs accurate wavelength values;

8. Xenon lamp synchronous triggering

　　Spectral Color Temperature IlluminometerMain technical parameters:

光谱色温照度计

TTL interface (connector 1.0-16Pin, voltage level 3.3-5V):

光谱色温照度计

After plugging in the USB cable, open the Device Manager and find the corresponding port number (for systems below Win10, drivers need to be installed, please refer to the product manual for the download address), as shown below:

光谱色温照度计