Small high and low temperature test chamber

Price of small high and low temperature test chamberOverview of High and Low Temperature Box Prices, Consultation on High and Low Temperature Box Prices

High and low temperature chambers are suitable for reliability testing of industrial products at high and low temperatures. They are used to test the various performance indicators of components and materials of familiar products such as electronics and electrical engineering, automobiles and motorcycles, aerospace, marine weapons, universities, and research institutions under high and low temperature cycling changes. The management personnel of high and low temperature chambers must be familiar with the performance and operation procedures of the chambers, and properly keep the technical data and user manuals of the chambers. Ensure the completeness of the accessories for the high, low, and high temperature boxes, carefully keep records of the past of the high, low, and high temperature boxes, and ensure that the accounts, cards, and items match.

During the use of high and low temperature chambers, the following requirements should be noted:

1. During operation, please do not open the box door unless necessary, as it may result in the following adverse consequences:

High temperature airflow rushed out of the box, causing burns.

High temperature air may trigger a fire alarm and cause misoperation.

The inside of the box door still maintains high temperature, causing burns.

2. When installing the high and low temperature box, the outer shell of the box must be grounded. If the high and low temperature box is not grounded, it will be very dangerous if there is a leakage of electricity.

3. Avoid turning off and then turning on the freezer within 15 minutes.

4. If the heating test sample is placed inside the box, please use an external power supply for the test sample power control, and do not directly use the local power supply. When placing high-temperature samples for low-temperature testing, attention should be paid to keeping the opening time of the box door as short as possible.

5. Circuit breakers and over temperature protectors provide safety protection for local test products and operators, and require regular inspection.

6. Prohibit testing explosive, flammable, and highly corrosive substances.

7. The lighting should be turned off at all times except when necessary.

8. Before doing low-temperature work, the studio should be wiped dry.

9. On any section perpendicular to the prevailing wind direction, the sum of the cross-sectional areas of the test load should not exceed one-third of the working section at that location.

10. It is normal for smoke and odor to be eliminated during the first week of high temperature operation in this high-low temperature box. This is because the steel plates used in the manufacturing of the high-low temperature box have lubricating oil on them, so the new high-low temperature box will produce an odor caused by the burning of oil fumes when it is first used at high temperatures.