High and low temperature test chamber

NegotiableUpdate on 12/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Anhui Hilbert high and low temperature test chamber is suitable for testing and determining the parameters and performance of electrical, electronic, and other products and materials after high temperature, low temperature, or constant temperature environmental changes.

Product Details

Anhui Hilbert High and Low Temperature Test ChamberSuitable for testing and determining the parameters and performance of electrical, electronic, and other products and materials after high temperature, low temperature, or constant temperature environmental changes.

Structural characteristics of high and low temperature test chamber:
1. Original French imported "Taikang" refrigeration unit and complete set of refrigeration accessories. The refrigeration method adopts single-stage or two-stage cascade refrigeration (air-cooled or water-cooled).
2. Original Japanese imported temperature control instrument (excluding constant temperature box) input method PT100 sensor.
3. The inner liner is made of high-quality imported stainless steel plate, and the outer shell is made of A3 steel plate electrostatically sprayed.
4. Stainless steel flake high-efficiency electric heater.

Anhui Hilbert High and Low Temperature Test Chamberselection

model		GDW -50	GDW -100	GDW -150	GDW -225
Studio size (mm)		300× 400× 450	400× 450× 550	500× 600× 500	500× 600× 750
model		GDW -408	GDW -800	GDW -010	GDW -015
Studio size (mm)		600× 800× 850	800× 1000× 1000	1000× 1000× 1000	1000× 1500× 1000
Operation mode		Fixed value operation, program operation
technology parameter	temperature upper limit	＋100℃/＋150℃ /+200℃
	lower temperature limit	0 ℃、-10℃、－ 20 ℃、－30℃、-40℃、-50℃、-60℃、-70℃、-80℃
	temperature fluctuation	± 0.5℃
	Temperature Uniformity	≤ 2.0℃
	temperature deviation	± 2℃
Temperature Controller		Imported temperature controller
temperature sensor		Pt100 platinum resistor
refrigeration system	Refrigeration compressor/method	Imported fully enclosed compressor unit/single-stage compression refrigeration, binary cascade compression refrigeration
	cooling method	air cooling
Security protection measures		Protection against overheating, overload, overvoltage, leakage, short circuit, etc
material	Box/insulation material	Cold rolled steel plate with electrostatic spraying for the outer shell, SUS304 stainless steel plate/ultra-fine glass wool for the inner liner
Standard Configuration		One test hole of size 50, two sets of test shelves, and lighting fixtures
product standard		GB10589: Technical Conditions for Low Temperature Test Chambers GB10592: Technical Conditions for High and Low Temperature Test Chambers
Test Method		GB/T2423.1、 GB/T2423.2、 GB2423.22、 GJB150.3、 GJB150.4

The high and low temperature test chamber can be divided into alternating test and constant temperature test according to the test methods and industry standards. Both test methods are upgraded and expanded on the basis of the high and low temperature test chamber. The alternating test chamber refers to the ability to set the required high and low temperatures and the required temperature time within the instrument parameters at once. The test chamber will follow the set program. The high and low temperature test chamber is used to set a fixed temperature to make the test effect closer to natural climate, simulate more adverse natural climate, and thus improve the reliability of the tested sample.

安徽希尔伯特高低温试验箱