High and low temperature humid heat chamber

NegotiableUpdate on 12/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Manufacturer of high and low temperature humidity chambers, with over 16 years of research and development experience, providing nationwide warranty for constant temperature and humidity controllers, offering non-standard customization, stable performance, * supply, and testing equipment that can simulate temperature and humidity ranges, suitable for reliability testing of industrial products at high and low temperatures. Inspect the various performance indicators of components and materials of electronic and electrical products, automobiles and motorcycles, aerospace, marine weapons, universities, research institutions and other related products under high and low temperature (alternating) cyclic changes

Product Details

High and low temperature damp heat test chamberTechnical parameters and performance indicators of the manufacturer

High and low temperature humid heat chamber model			GDS-50	GDS-100	GDS-150	GDS-225
Studio size (mm)			300×400×450	400×450×550	500×600×500	500×600×750
High and low temperature humid heat chamber model			GDS-408	GDS-800	GDS-010	GDS-015
Studio size (mm)			600×800×850	800×1000×1000	1000×1000×1000	1000×1500×1000
Operation mode			Fixed value operation, program operation
skill technique ginseng number		temperature upper limit	＋100℃/＋150℃ /+200℃
		lower temperature limit	0℃、 -10℃、－ 20℃、－ 30℃、 -40℃、 -50℃、 -60℃、－ 70℃、－ 80℃
		temperature fluctuation	±0.5 ℃
		Temperature Uniformity	≤2.0 ℃
		temperature deviation	±2 ℃
		humidity range	20～98％RH
		Humidity deviation	＋ 2/－ 3％ RH
		warm-up time	40min（ 20℃～ 100℃）
		cooling time	25min（ 20℃～ 0℃）、 40min（ 20℃～－ 20℃） 60min（ 20℃～－ 40℃）、 80min（ 20℃～－ 70℃）
Temperature and humidity controller			Imported temperature and humidity controller
temperature sensor			Pt100 platinum resistor
humidity sensor			Pt100 platinum resistance dry wet bulb
manufacture cold be unify		refrigeration unit	Imported fully enclosed French Taikang compressor unit (environmentally friendly)
		Cooling method	Single stage compression refrigeration, binary cascade compression refrigeration
		cooling method	Air cooling/water cooling
heater			Nickel chromium alloy electric heater
Humidification method			Boiler type evaporation
humidifier			Stainless steel heating tube
Dehumidification method			Low temperature dehumidification
circulating fan			axial flow fan
Security protection measures			Overtemperature, overload, overpressure, oil pressure Protection against leakage, water interruption, short circuit, power phase loss, and phase error
material material	housing material		Cold rolled steel plate electrostatic spraying
	Inner wall material		SUS304 stainless steel plate
	thermal insulation material		Ultra fine glass wool
Standard Configuration			One test hole of size 50, two sets of test sample shelves, lighting fixtures, and insulated glass observation windows coated with electric heating film
Optional accessories			Communication interface, remote monitoring computer and software
power supply			380V±10％， 50Hz， 3P＋ N＋ G
product standard			GB10586: Technical Conditions for Damp Heat Test Chamber GB10589: Technical Conditions for Low Temperature Test Chamber