Small belt conveyor

Belt conveyors have been widely used in various fields of human life, and their applications are becoming increasingly widespread. It saves a lot of time, labor, and daily production increasingly relies on conveyors.

The final standard for belt conveyors is to ensure that the conveyor belt always runs on the centerline of the idler and drum. When installing the idler, frame, and drum, the following requirements must be met:

When hanging a conveyor belt, first lay the conveyor belt strip on the idler roller in the unloaded section, wrap it around the drive drum, and then lay it on the idler roller in the overloaded section. The hanging strap can be used with a 0.5-1.5t hand-operated winch.

When tightening the strap for connection, the roller of the tensioning device should be moved to the limit position, and the trolley and spiral tensioning device should be pulled towards the direction of the transmission device; The vertical clamping device needs to move the drum to the top. Before tightening the conveyor belt, the reducer and motor should be installed, and the inclined conveyor should be equipped with a braking device. After the installation of the belt conveyor, it is necessary to conduct an idle test.

The supporting structure frame must be in a straight line and maintained horizontally. Therefore, after the installation of the drive drum and roller frame, the centerline and level of the conveyor should be finally aligned. Then fix the rack on the foundation or floor slab. After the belt conveyor is fixed, feeding and unloading devices can be installed. All rollers must be arranged in rows, parallel to each other, and maintained horizontally. All the rollers are arranged in rows and parallel to each other.