Simulated automobile vibration testing machine

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Simulated automobile vibration testing machine

Product Details

Main functions of the device:

This machine is suitable for simulating transportation testing of products such as toys, electronics, furniture, gifts, ceramics, packaging, etc. Used to test the ability of products and their packaging to resist transportation hazards.

Performance indicators and system composition of automobile simulation transportation vibration testing machine.

model	RL-8413
Sample limitations	This test equipment prohibits the testing of flammable, explosive, volatile substance samples and corrosive substance samples, storage of biological samples, storage of strong electromagnetic emission source samples, and storage

Weight and size

Dimension of worktable	1000x1000mm L × W
Machine size	Approximately 1200x1300x1150mm L × W × H
weight	≤430㎏

Machine power and power supply conditions

Machine power	1.5 KW
Maximum current	5A
Power supply conditions and sources	AC 220V single-phase R, N+protective grounding; The allowable voltage fluctuation range is 10%; The allowable frequency fluctuation range is 50/60 Hz ± 0.5Hz; TN-S power supply or TT power supply The grounding resistance of the protective grounding wire is less than 4 Ω Require users to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must be independently controlled. When placing powered samples in the equipment use box, please use an external power source for the sample power supply and do not directly use the local power supply;

performance index

Environmental conditions for use	The values measured under the conditions of an ambient temperature of+25 ℃, relative humidity ≤ 85%, and no sample inside the test chamber
Vibration frequency	100~300rpm
amplitude	25.4mm
Maximum test load	100KG (weight exceeding the range needs to be explained)
working hours	0-9999 timing units can be switched between seconds, minutes, 10 minutes, hours, and 10 hours
Display frequency accuracy	0.1rpm
Frequency error	±2% rpm
Vibration mode	Rotating style (horse racing style)
Operating noise	Measure at a distance of 1 meter from the machine and 1.2 meters from the ground in front of the machine, with a value of ≤ 70db
Test meets the conditions and execution standards	ISTA_1A_2001 Transportation Test

structure characteristics

Machine structure

Precision design and manufacturing, exquisite appearance, ultra quiet operation

Adopting outer packaging stainless steel plate to support the tabletop, ensuring long-term use without rusting

The surrounding panels and control box of the machine are treated with cold-rolled steel plates and baked paint

The machine base is made of heavy-duty channel steel and equipped with shock absorbers, ensuring low noise operation of the machine

Install fixed holes on several machines, and use expansion screws to position the machines during on-site installation

Install a sample support bracket on the vibration table and install two sample fixing brackets in the support bracket according to customer requirements (as shown in the picture)

Adopting a specially crafted cam mechanism to simulate galloping vibration

Synchronous quiet belt drive with extremely low noise

The control box and experimental machine are separate types

electrical control system

Control system mechanism

Adopting a LCD digital display controller, it can accurately control the vibration frequency

The photoelectric sensor accurately records the rotational speed of the motor

Simple adjustment knob controls vibration frequency, easy to operate

DC motor speed regulation, smooth operation, strong load capacity