Silicon dioxide analyzer

NegotiableUpdate on 06/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SLIA-5000 silica analyzer is used to measure trace amounts of silica in boiler water and pure water. Has extremely fast response speed and high repeatability in measurement results.

Product Details

SLIA-5000Silicon dioxide analyzer

Quickly and automatically measure trace amounts of silica in boiler water and purified water

The management of silicon dioxide (SiO2) is crucial for preventing the formation of scale. This is because the presence of scale in turbines can reduce power generation efficiency, especially for thermal and nuclear power plants. Based on HORIBA's years of technical experience in the field of analysis, we have developed the SLIA-5000 silica water quality analyzer with stability and maintainability for measuring trace amounts of silica in boiler water and pure water.

Measurement time 5 minutes, repeatability ± 2% F.S

Has extremely fast response speed and high repeatability in measurement results.

● Wide range

Measurement can be achieved from high sensitivity of 0-10 μ g/L to high concentration of 0-5.0 mg/L.

● Self diagnostic function

Self diagnosis of various abnormalities, such as sampling or reagent supply abnormalities, calibration abnormalities, light source abnormalities, and internal temperature abnormalities.

● Automatic calibration function

Automatic zero point calibration and range calibration can be preset to be performed at specific times for each measurement.

● Able to automatically switch measurement cycles

Automatically shorten the measurement cycle when the sampling concentration exceeds the set concentration range, and automatically extend the measurement cycle when the sampling concentration is below the set concentration range, which can save power and reagents.

● Improve operability

Equipped with a color LCD touch screen, it has strong operability.

SLIA-5000Silicon dioxide analyzerspecification

Product Name	silicon dioxide
model	SLIA-5000
Overall dimensions	600（W）x750（D）x1600（H）mm
weight	130kg
power supply	100V AC±10% 50/60Hz Optional: AC 110V/115V/120V/220V/230V/240V ± 10% 50/60Hz
Consumption voltage	500VA
measurement range	0~10/0~100μg/L 0~50/0~500μg/L 0~100/0~1000μg/L 0~200/0~2000μg/L 0~0.50/5mg/L (Please specify when purchasing)
repetitiveness	±2%F.S.
Measuring principle	Molybdenum Blue
measurement point	1-4 o'clock (please specify when purchasing)
measure time	5min
measurement period	5~999min (can be selected in the control panel)
correction	Zero point calibration: automatic calibration for each measurement Range calibration: through equivalent filters
compensation	Zero drift -300.0~300.0 μ g/L (can be selected in the control panel)
reagent	A: Sulfuric acid and ammonium molybdate B: Oxalic acid C: L (+) - ascorbic acid
Reagent exchange cycle	One week (reagent storage temperature): 30 ℃ (86 ° F) or lower
ambient temperature	0~45℃（32~113°F）
ambient humidity	Relative humidity of 85% or lower (no condensation)
Installation environment	Indoor installation, with no dust or mist in the air, no corrosive gases, no direct sunlight, and minimal vibration
Sampling conditions	Temperature 2~40 ℃ (36~104 ° F), flow rate 0.5~1.0L/min, pressure 0.02~0.20MPa, pH value ≤ 11.0 Simultaneously, phosphate ion concentration: 20mg/L or lower No phosphate ion concentration within the range of 0~10/0~100 μ g/L (ultrapure water specification)
Concentration output	Standard: DC 4~20mA or DC 0~16mA (operation setting) Optional: DC 0~1V or DC 1~5V Output format: Maintain output or mark output (operation setting) Maximum load below 500 Ω, input/output insulation type, non insulated between channels
Contact output	Standard: A contact output (please contact us if you want to set it to B contact) Contact capacity AC250V 3A, DC 30V 3A Universal measurement circuit: in measurement, standby, maintenance, external control status, synchronization signal, instrument abnormality, power interruption, alarm, etc Each measurement line: measurement line, measurement range, sampling interruption, abnormal concentration
Contact input	Effective for remote control without voltage a contact input (optional contact) Insulated input (-) side universal ON impedance: max100 Ω Open voltage: maxDC 26V Short circuit power supply: maxDC 13mA Universal measurement circuit: measurement starts, calibration starts, cycle switching Each measurement line: measurement line setting, measurement range setting High, measurement range setting Low
display	Color LCD touch screen
data storage	Measurement value: Over one year Alarm history: up to 500 records; Correction history: up to 100 records; Operation history: up to 100 records. Can use external storage USB storage