SUNPLUS Magnetic Rod Cleaning Quality Analyzer

Magnetic cleaning quality analyzer

This is an automatic inspection and testing equipment designed specifically for cleaning magnetic rods. It can automatically detect the detachment of iron filings and magnetic particles and make evaluations. It has reliable detection, can detect fine powder particles, and distinguish traces of manual interference. Therefore, it is an effective quality evaluation instrument for the cleaning process of magnetic rods.

technical indicators

1. Measurement specifications: 0.05mm, 0.1mm,0.2mm,0.3,0.4mm,0.8mm,1.0mm,1.2mmAccording to the selected criteria, it can be selected in the software interface.

2. Minimum detection target: 0.02mm

3. Detection accuracy: less than 0.02mm

4Detection area: not less than 100 × 230mm

5. Magnification factor:>20x

6. Optical density: not less than 6000 lumens

7. Light source requirements:24V/60W

8. Power supply: 220V, 50HZ

9.Overall dimensions:Approximately 459mm x 426mm x (276mm+380mm)

Instrument functional characteristics

1. Measure the size and quantity of magnetic particles.

2. Can provide a distribution map of magnetic powder.

3. The graph can be zoomed in and out.

4. The tested targets can be classified, counted, and statistically analyzed.

5. Automatically generate detection reports according to applicable standards.

6. The report and chart can be printed and stored

7. Magnetic powder is not affected by powder, therefore it has a high detection rate.