Film plastic sheet impurity black dot color point detector SUNPLUS

Resin film black spot detector

purpose

Analyze the size, quantity, and proportion of impurity black spots on resin sheets according to relevant national standards.

Suitable for transparent, semi transparent, opaque films and particles such as PP, PE, PVC, PPS, etc.

technical indicators

1. Measurement specification: 0.1mm,0.2mm,0.3,0.4mm,0.8mm,1.0mm,1.2mmAccording to the selected criteria, it can be selected in the software interface.

2. Minimum detection target: 0.05mm

3. Detection accuracy: less than 0.025mm

4Detection area: not less than 100 × 100mm

5. Magnification factor:>20x

6. Optical density: not less than 6000 lumens

7. Light source requirements:24V/60W

8. Power supply: 220V, 50HZ

9.Overall dimensions:Approximately 459mm x 426mm x (276mm+380mm)

Instrument functional characteristics

1. Measure the size and quantity of black spots, as well as the proportion of black spots.

2. Can provide a distribution map of black spots.

3. The black dot map can be zoomed in and out.

4. The tested targets can be classified, counted, and statistically analyzed.

5. Automatically generate detection reports according to applicable standards.

6. Reports and charts can be printed and stored.

7. The square of the membrane is tested one by one on the testing platform.