Powder Impurities Black Spot Color Spot Detector SUNPLUS

NegotiableUpdate on 12/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This is a desktop automatic detection device for powder black spots or color spots. Using a sample dish as a carrier, the powder is placed into the sample dish batch to detect the defect points of the powder, and the proportion of defects is determined based on the amount of detection, thereby obtaining the quality status of the tested batch of samples. The preparation method of the sample can also be adjusted according to the user's requirements to meet their testing habits.

Product Details

Using a powder detector

Powder black spot detector

This is a black spot or color spot detector for powder or fine particles, which analyzes the size, quantity, and proportion of impurity black spots in powder according to relevant national standards.

technical indicators

1. Measurement specification: 0.1mm,0.2mm,0.3,0.4mm,0.8mm,1.0mm,1.2mmAccording to the selected criteria, it can be selected in the software interface.

2. Minimum detection target: 0.05mm

3. Detection accuracy: less than 0.03mm

4Detection area: not less than 200 × 200mm

5. Vessel size: 100mm x 100mm net area, used for detecting powder black spots

6. Magnification factor:>20x

7. Optical density: not less than 6000 lumens

8. Light source requirements:24V/60W

9. Power supply: 220V, 50HZ

10.Overall dimensions:Approximately 459mm x 426mm x (276mm+380mm)

Instrument functional characteristics

1. Measure the size and quantity of black spots, as well as the proportion of black spot particles.

2. Can provide a distribution map of black spots.

3. The black dot map can be zoomed in and out.

4. The tested targets can be classified, counted, and statistically analyzed.

5. Automatically generate detection reports according to applicable standards.

6. Reports and charts can be printed and stored.

7. powder materialUsing vessels as carriers, batch testing.