STA-9200A Integrated Vibration SensorBy integrating vibration velocity sensors and precision measurement circuits, the traditional "sensor ten transmitter" mode of vibration measurement system has been achieved, realizing an economical high-precision vibration measurement system. This transmitter can be directly connected to DCS, PLC or other systems, making it an ideal choice for vibration measurement of factory equipment such as fans and pumps.
Installation position: Install vertically or horizontally on the measured vibration point, and fix the bottom of the transmitter with M10 screws.

STA-9200A Integrated Vibration Sensortechnical parameters
灵 敏 度: 20mv/mm/s5%、30mv/mm/s5%、50mv/mm/s5%
2. Frequency response: 5-500 Hz Instrument Co., Ltd
3. Natural frequency: 10Hz
4. Measurement range: 1. 0-10mm/s, 0-20mm/s, 0-50mm/s
2、0～100um、0～200um、0～500um
5. Output current: 4-20mA
6. Output impedance: ≤ 500 Ω
7. Working voltage: DC24V
8. High acceleration: 10g
9. Measurement direction: vertical or horizontal
10. Operating environment: Temperature -30 ℃~50 ℃ Relative humidity ≤ 90% Sensitivity: 20mv/mm/s5%, 30mv/mm/s5%, 50mv/mm/s5%
2. Frequency response: 5-500 Hz Instrument Co., Ltd
3. Natural frequency: 10Hz
4. Measurement range: 1. 0-10mm/s, 0-20mm/s, 0-50mm/s
2、0～100um、0～200um、0～500um
5. Output current: 4-20mA
6. Output impedance: ≤ 500 Ω
7. Working voltage: DC24V
8. High acceleration: 10g
9. Measurement direction: vertical or horizontal
10. Operating environment: Temperature -30 ℃~50 ℃, relative humidity ≤ 90%