PR-3010 integrated vibration transmitter

PR-3010 integrated vibration transmitter

Overview:
The two-wire transmitter uses a standard 4-20mA DC current to transmit analog signals. The two-wire system has the following advantages: the current itself supplies power to the transmitter; The current signal is not easily disturbed; The internal resistance of the current source is infinite, and the series connection of wire resistance in the circuit does not affect the measurement accuracy; It can transmit hundreds of meters using twisted pair cables. The JX56 series transmission sensor developed by our company is easy to use and convenient to connect to data acquisition devices such as PLC, DCS, and recorders. It has multiple * performance advantages such as small size, light weight, stability, and reliability.

PR-3010 integrated vibration transmitter

technical parameters
Frequency response: 5-1000Hz (-3db)
▲ Sensitivity: 100.0mv/mm s-1, ± 5%
(Measured at 80Hz and a speed of 10mm/s)
▲ Amplitude linearity:<3%
▲ Lateral sensitivity ratio:<5%
▲ Maximum measurable displacement: 1mm (single peak value)
▲ Work direction: with the sensor installation surface at 0 ° below
MLV-6H 90°±2.5°（水平型）
MLV-6V 0 °± 2.5 ° (vertical type)
▲ Output resistance: ≤ 5K Ω
▲ Insulation resistance:>2M Ω
▲ Environmental conditions: dustproof, moisture-proof, and oil proof
▲ Weight: Approximately 350g
▲ Installation method of vibration sensor:
Fixed with a double headed bolt
Bolt specification: M10 × 1.5
Or customized according to customer requirements.