PR-3010 Integrated Vibration Transmitter

PR-3010 Integrated Vibration Transmitter

Function:

It is mainly suitable for power generation, steel, metallurgy, chemical industry and other fields. Its characteristics are small size and easy installation. By continuously measuring various rotating machinery and converting it into a standard 4-20mA current output, it is sent to PLC, DCS system, DEH system, etc. Paired with a magneto electric speed sensor for measuring the vibration of rotating machinery, it can detect abnormal situations in rotating machinery early, handle them in a timely manner, and eliminate hidden dangers. Fault monitoring: Monitor the vibration of rotating machinery, such as casing vibration, bearing vibration, frame vibration, etc; Monitor the increase in vibration caused by rotor imbalance, misalignment, loose components, damaged rolling bearings, gear damage, etc.

And it comes with a standard 4-20mA current output, directly connected to DCS, PLC or other equipment, truly realizing the "sensor ten monitoring instrument" type vibration monitoring function. This product is easy to observe on site, has excellent performance, and is relatively affordable compared to vibration monitoring instruments, making it an ideal choice for factory equipment vibration measurement and monitoring. The effective value of vibration velocity or peak to peak value of vibration displacement is displayed on the LCD screen, and it has a standard 4-20mA current output, directly connected to DCS, PLC or other equipment, truly realizing the "sensor ten monitoring instrument" type vibration monitoring function. This product is easy to observe on site, has excellent performance, and is relatively affordable compared to vibration monitoring instruments, making it an ideal choice for factory equipment vibration measurement and monitoring.

PR-3010 Integrated Vibration Transmitter

technical parameters
Frequency response: 5-1000Hz (-3db)
▲ Sensitivity: 100.0mv/mm s-1, ± 5%
(Measured at 80Hz and a speed of 10mm/s)
▲ Amplitude linearity:<3%
▲ Lateral sensitivity ratio:<5%
▲ Maximum measurable displacement: 1mm (single peak value)
▲ Work direction: with the sensor installation surface at 0 ° below
MLV-6H 90°±2.5°（水平型）
MLV-6V 0 °± 2.5 ° (vertical type)
▲ Output resistance: ≤ 5K Ω
▲ Insulation resistance:>2M Ω
▲ Environmental conditions: dustproof, moisture-proof, and oil proof
▲ Weight: Approximately 350g
▲ Installation method of vibration sensor:
Fixed with a double headed bolt
Bolt specification: M10 × 1.5
Or customized according to customer requirements.