SMC chemical liquid pneumatic control valve JLV20/30/40/50

Gas control valve for chemical liquids
By adopting a special structure, the pilot exhaust has been optimized, and the valve closing speed has been reduced before the seat valve collides with the orifice. Adopting a special structure to reduce the impact when the valve is closed. Inhibit the generation of fine dust. Suppress the generation of fine dust and contribute to reducing space occupation

High pressure/high back pressure correspondence: The range of operating pressure and back pressure has been expanded, and the common operating pressure is 0-0.5MPa (up to 66% compared to previous products), and the back pressure is 0-0.5MPa (up to 150% compared to previous products)
Precautions for operating air source: Please use clean air. When compressed air contains synthetic oils, salts, corrosive gases, etc. containing chemicals and organic solvents, it can cause product damage or poor operation. Do not use.
Environmental precautions: 1. Do not use in an explosive gas environment. 2. Do not use in places where vibration or impact occurs. If there is a heat source around, please shield the radiant heat. 4. Do not use in environments with temperatures exceeding the product specifications.
Maintenance and inspection precautions: 1. Before removing components and compressed air supply and exhaust components, please cut off the supply air and power, and exhaust the compressed air in the system. In addition, when reinstalling or replacing components and restarting them, please first confirm whether it is safe and whether the components can operate normally. 2. Please remove any remaining chemical solution and replace it with pure water, air, etc. before proceeding with the operation. 3. Do not disassemble the product. Our company does not provide warranty for products that have been disassembled. If you need to decompose, please contact our company or agency. 4. In order to use the valve at its optimal performance, please regularly inspect and maintain the valve and joint parts for leaks.
Please regularly discharge the condensate water from the air filter.
Chemical liquid pneumatic control valve JLV20/30/40/50
● Add subject level 4[New]
● Beneficial for suppressing dust generation and saving installation space
Adopting a special structure to reduce the impact when the valve is closed and suppress the generation of micro chips.
Save installation space (compared to previous products): valve width reduced by 20%, installation spacing reduced by 45%
● Corresponding to high pressure/high back pressure
Usage pressure: 0-0.5MPa Back pressure: 0-0.5MPa (increased by 66% compared to before)