Ruipu REAP AT600 six in one toxic and harmful gas detector (CO, H2S, O2, Ex, CO2, NOX)

Ruipu REAP AT600 six in one toxic and harmful gas detector (CO, H2S, O2, Ex, CO2, NOX)Introduction:

The AT600 composite gas six in one detector is used in situations where a mobile, fast, and accurate detection of the concentration, temperature, and humidity measurement values of multiple gases on site is required, and an alarm is triggered if they exceed the standard. The AT600 composite gas six in one detector adopts a 2.5-inch high-definition color screen to display concentration in real time. It uses a Swiss high-precision capacitive digital temperature and humidity sensor. The AT600 has advanced circuit design and mature core algorithm processing, and has obtained multiple software works and appearances. The AT600 can detect gas concentrations in pipelines, confined spaces, and atmospheric environments, as well as detect gas leaks. It can detect over 500 types of gases and can also detect high concentrations of various background gases such as nitrogen or oxygenSingle gasPurity.

Ruipu REAP AT600 six in one toxic and harmful gas detector (CO, H2S, O2, Ex, CO2, NOX)characteristic:

● Fully waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti electromagnetic interference;

Protection level IP67, can withstand rain and short-term immersion, built-in replaceable water vapor and dust filters, can be used in high humidity and high dust environments without damaging sensors and instruments;

Built in pump suction measurement, fast response, sampling distance of more than 10 meters, special gas path design, can directly detect negative pressure or positive pressure of -0.5 to 2 kilograms of gas, without affecting the measurement results;

The high-definition 2.5-inch color screen displays real-time information such as concentration, alarm, time, temperature, humidity, storage, communication, printing, battery level, charging status, etc. The menu interface uses high-definition simulation icons to display the function names of each menu;

● Large capacity data storage function, with a standard storage capacity of 100000 pieces of data, and larger capacity can be customized. Optional SD card storage function, supporting real-time storage, timed storage, or only storing alarm concentration data and time, supporting local viewing and deletion of data, and can also upload data to the computer through USB, infrared communication, RS232 interface, and use upper computer software to analyze, store, and print data. Support remote wireless transmission (optional function);

Infrared communication interface (optional), USB interface, RS232 interface automatic recognition, optional external micro wireless infrared printer, printing: company name, gas name, date and time, environmental temperature and humidity, concentration data, detection results (whether qualified);

● USB charging interface, can be charged with a computer or power bank, compatible with mobile phone chargers, overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, supports USB hot plugging, and the detector can work normally during charging;

Adopting a 6000mA high-capacity rechargeable polymer battery, it can work continuously for a long time;

Sound and light alarm, vibration alarm, visual alarm, undervoltage alarm, fault alarm, and multi-directional stereoscopic display of alarm status during alarm.

The alarm value can be set, and the alarm methods can be selected from low alarm, high alarm, interval alarm, and weighted average alarm;

High precision temperature and humidity measurement (optional), with temperature compensation for the sensor. The instrument operates within a temperature range of -40 to 70 degrees Celsius and can detect gases up to 1300 degrees Celsius (optional high temperature sampling, cooling, and filtering handle or high temperature and high humidity pretreatment system);

It can detect in real-time or at regular intervals (for situations where the amount of gas being measured is relatively small), and the pump can be turned off to extend the start-up time when not detected.

● Can simultaneously detect 6-8 gases, with freely switchable units. Conventional gases do not require input of molecular weight, while special gases require input of molecular weight to automatically calculate and switch. Units available: PPM, mg/m3, Vol%, LEL%, PPHM, ppb, mg/L

Three display modes can be switched: simultaneously displaying four gas concentrations, large font cyclic display of single channel gas concentration, real-time curve, automatic or manual cycling between channels can be switched, whether to display the maximum value, minimum value, gas name, and historical record curve graph can be viewed.

The interface can be switched between Chinese and English, with a default Chinese interface and concise Chinese or English operation prompts, making it easy for users of all ages to operate;

● Data recovery function, which can be selectively restored or fully restored. Automatic identification and prevention of concentration calibration errors to avoid adverse effects caused by human factors.

● Zero point automatic tracking, multi-level calibration of target points to ensure measurement linearity and accuracy. Can simultaneously comply with national standards and local metrology bureau standards

● It can record calibration logs, maintenance logs, troubleshooting solutions, remind sensor life expiration, and remind the next concentration calibration time

Ruipu REAP AT600 six in one toxic and harmful gas detector (CO, H2S, O2, Ex, CO2, NOX)Technical parameters:

Gas detection:Composite gas (carbon monoxide CO, hydrogen sulfide H2S, oxygen O2, combustible gas Ex, carbon dioxide CO2, nitrogen oxide NOX), optional: can detect the concentration and temperature humidity of any 6 gases, and can be expanded to 8 gases depending on the sensor and on-site environment

Detection range:CO（0～1000ppm）、H2S（0～100ppm）、O2（0～30%Vol）、Ex（0～100%LEL）、CO2（0～5000ppm）、 NOX（0～1000ppm）， Other ranges can be customized

resolving power:CO（0.1ppm）、H2S（0.01ppm）、O2（0.01%Vol）、Ex（0.1%LEL）、CO2（1ppm）、NOX（0.1ppm）， Higher resolution customizable

Detection principle:Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, depending on gas, range, on-site environment, and user requirements

Detection method:Built in pump suction, flow rate 500 milliliters per minute

Display mode:2.5-inch 320X240 high-definition color screen display, 8-button operation

Detection accuracy:≤±1%（F.S）

Linearity:≤±1%

Repeatability:≤±1%

Alarm method:Sound and light alarm, vibration alarm, visual alarm, sound and light+vibration+visual alarm, turn off alarm

Response time:T90 ≤ 20 seconds

Recovery time:≤ 30 seconds

Working power supply:DC3.6V

Sensor lifespan:Electrochemical principle takes 2-3 years, oxygen can be used for 2 or 6 years, infrared principle takes 5-10 years, catalytic combustion takes 3 years, and thermal conductivity takes 5 years

Usage environment:Temperature -40 ℃~+70 ℃; Relative humidity ≤ 0-99% RH (built-in filter can be used in high humidity or high dust environments)

Sample gas temperature:-40 ℃~+70 ℃, optional high temperature sampling and cooling filter handle or high temperature and high humidity pretreatment system can detect flue gas concentration up to 1300 ℃

Temperature measurement:-40 ℃~+120 ℃ (optional) Accuracy 0.3 ℃

Humidity measurement:0-100% RH (optional) accuracy 2% RH

Battery capacity:3.6VDC, 6000mA large capacity rechargeable polymer battery with overcharge, overdischarge, overvoltage, overheating, and short circuit protection functions

Data storage:Standard capacity of 100000 pieces of data, supports SD card storage, unlimited capacity, supports local viewing, deletion or data export, free upper computer communication software, storage function defaults to off state, can be set to on state, storage time interval can be set arbitrarily

Communication interface:USB (charging and communication) RS232、 Infrared communication, automatic recognition

printer:Optional, external micro wireless infrared thermal printer

Explosion proof type:Intrinsically Safe

Explosion proof mark:Exia II CT6

Protection level:IP67， Rain proof and short-term soaking, dust proof

External dimensions:180×78×33mm(L×W×H)

Weight:350g

Standard attachments:Instruction manual, certificate of conformity, warranty card, USB charger (including data cable), back clip, humidity dust filter, high-end aluminum alloy instrument box

Optional accessories:1.2m extendable sampling handle (1-meter hose), temperature and humidity measurement function, external micro wireless infrared printer, CD (upper computer communication software), hanging rope, high temperature sampling and cooling filter handle, high temperature and high humidity pretreatment system, multiple humidity and dust filters, SD card storage, wireless data communication

Application scenarios:All occasions requiring gas concentration detection, such as petroleum, chemical, pharmaceutical, environmental protection, warehousing, flue gas analysis, air treatment, etc