GDS-1000A-U series digital oscilloscope

With the increasing complexity of signals, digital oscilloscopes may not be able to fully present the full picture of the signal or the relative relationship between signals, even if the sampling rate is high The GDS-1000A-U series digital oscilloscope provides 70/100/150MHz bandwidth and 1GSa/s high-speed real-time sampling speed. The new Memory Prime technology further optimizes the problem of waveform update rate reduction that may occur in general digital oscilloscopes due to long memory, allowing you to analyze waveform details at full speed with maximum efficiency.

5.7 High resolution color TFT display with no bright spots, support for USB Host and Device interfaces, and user-friendly human-machine interface ... More importantly, the GDS-1000A-U series comes with a lifetime warranty plan! All of this GW Instek is just to enable you, who are pursuing it, to achieve the maximum benefit at the lowest testing cost, and to showcase your skills in your work.

• Supports PictBridge printers

  GDS-1000A-U is one of the few USB interfaces currently available on the DSO market that can provide complete remote control or data capture. The GDS-1000A-U series also supports PictBridge, allowing you to print directly to the printer without complex configuration. After connecting the USB cable, you can use a PictBridge compatible printer, and printing is as simple as pressing a button.

• Quickly mark and search for horizontal positions

  Memory Prime technology can store up to 2M waveform data points. In order to help engineers overcome the difficulties of analyzing large amounts of data and improve the efficiency of waveform analysis, we provide horizontal page redirection and time stamp setting functions. Everything will allow you to enjoy the measurement pleasure of 2M storage depth. Demo video

• Automatic measurement range setting

  The built-in automatic setting function of digital oscilloscopes brings significant convenience to engineers. Due to the complexity of the product, traditional automatic measurement information is no longer sufficient to meet modern measurement needs. The new cursor measurement range setting function can divide the automatic measurement area through the cursor. Demo video

• Flexible probe factor settings

  There are various testing probes on the market, such as passive probes, differential probes, and current probes. The attenuation rate of each type of probe also varies greatly. To ensure compatibility, GDS-1000A-U supports probe decay rates and voltage current probes ranging from 0.1X to 2000X.

• About Memory Prime Technology

  What are the features that most DSOs lack? It is of sufficient recording length. Does your DSO have sufficient record length? With a record length of 2M points, GDS-1000A-U can obtain more waveform data. A sampling rate of 1GSa/s and a recording length of 2M points are crucial in single waveform capture. GDS-1000A-U allows you to monitor and observe single waveform events without missing any detailed information, which is unmatched by high sampling rate and low recording length digital storage oscilloscopes.

• easy to operate

  The comprehensive function acquisition mode and 27 automatic measurement functions help users accurately measure and capture waveform parameters. The advanced Auto Set function automatically captures and quickly displays waveforms. With the functions of addition, subtraction, multiplication, FFT, FFTrms, and Zoom FFT, the GDS-1000A-U series enables users to real-time understand measurement results and obtain rich testing information at the lowest computational cost.

• Observation - Delay ON/OFF

  For the convenience of waveform observation and analysis, the GDS-1000A-U series has the commonly used delayed on/off function in products. Delay opening allows users to observe signals through compensation of trigger points. With this feature, the horizontal scale and corresponding waveform can expand and contract along the delay point (rather than the trigger point), making it convenient to observe detailed information at a certain position of the waveform.

• Observation - unfolded from the ground/center

  In digital storage oscilloscopes, AC coupling usually plays a role in isolating direct current from alternating current, which is very useful for observing small AC signals with large DC biases. Due to the existence of communication coupling, small AC signals can be measured or detected at the center of the screen. However, for situations with strict frequency requirements, just as low-frequency components may be weakened, capacitive loads can also cause waveform distortion. The function of unfolding along the ground/center allows the vertical scale to unfold along the ground or screen center, avoiding waveform distortion caused by capacitive loads.

• FFT/FFTrms and Zoom FFT measurement

  The FFT function of a digital storage oscilloscope is commonly used to observe the fundamental and harmonic components of a signal, usually expressed in decibels (dB). However, sometimes it is difficult to determine the fundamental frequency of the signal in the noise spectrum in dB units. The FFTrms function of GDS-1000A-U series can easily solve your problems. The Zoom FFT measurement function provides a flexible observation method, allowing you to horizontally move FFT waveforms and amplify them up to 20 times, making it easy to observe FFT signals.

• PC remote control software

  Users can download Freewave software for free to connect to a PC through a USB interface for remote control. FreeWave software can save screen screenshots as image files (. bmp/. jpg), as well as record waveform data (. csv) and image files (. wmv) in real time. Not only can it continuously monitor and record waveforms for a long time, but previously recorded waveforms can also be accurately observed. In addition, instrument settings do not require complex command operations, FreeWave allows you to achieve twice the result with half the effort.

• USB Host&Data Recorder

  Waveform settings, data, or images can be stored on a USB drive through the USB Host interface. When the triggering conditions for the data logger are met, the data logger will continue to monitor the input signal and store waveform data. Users can track signals more easily and analyze and observe waveform data more conveniently.

• GO/NOGO functionality

  The Go/NoGo testing function is used to determine whether the input signal meets the user's requirements. Users can determine the boundary conditions by setting the allowable range of boundaries. When the out of bounds condition is met, the Go/NoGo test will choose whether to continue calculating the out of bounds count or stop the test.

• lifetime warranty

  Purchase GDS-1000A-U series digital storage oscilloscope and enjoy lifetime warranty service. GDS-1000A-U digital storage oscilloscope provides lifetime warranty, and we believe you have the same confidence in its quality as us. We promise you that by purchasing GDS-1000A-U, you will have a low maintenance cost, high-quality, and economical digital storage oscilloscope. Joint guarantee service, no matter where you are, we provide you with comprehensive support for at least 5 years even if the instrument is discontinued. For detailed information and applicable conditions regarding the lifetime warranty service, please visit Guwei Electronics at www.gwinstak.. Com/llw or your nearest distributor. 2 channels, 150/100/70 MHz bandwidth Dual sampling mode: 1GSa/s real-time sampling rate and 25GSa/s equivalent sampling rate Internal 2M ultra large memory Vertical voltage supply: 2mV~10V/div range Horizontal time scanning range 1ns~50s/div Full series 5.6 color TFT LCD with no bright spots Mathematical operations provide+, -, x, FFT, FFTrms, Zoom FFT Supports 27 automatic measurement functions USB Host&USB Device Interface Go/NoGo functionality data logger lifetime warranty