|
Multi channel conversion module
Module Description: Maximum Bandwidth Scanning Hot Annotation
Voltage and current (MHz) Ch/Sec offset
multiplexer
34921A 40 channel armature multi-channel 300V 1A 45MHz 100<3uV temperature reference 4 current channels
Conversion, low heat offset configuration with 2 or 4 wires
34922A 70 channel armature multi-channel 300V 1A 25MHz 100<3uV configuration with 2 or 4 wires
Converter
34923A 40/80 dry spring multi way 200V 0.5A 45MHz 500<50uV configuration for 1-wire, 2-wire or 4-wire
Converter
34924A 70 channel dry spring multi-channel 200V 0.5A 25MHz 500<50uV configuration with 2 or 4 wires
converter
34925A 40/80 channel optical isolation ± 80V 0.05A 1MHz and working<3uV configured as 1-wire, 2-wire, 4-wire
FET multiplexer factory
34980A Multi functional Data Acquisition, Switching, and Measurement Equipmentmatrix switch
34931A Dual 4x8 Armature Matrix 300V 1A 30MHz 100<3uV Backboard Expandable
34932A Dual 4x16 Armature Matrix 300V 1A 30MHz 100<3uV Backboard Expandable
34933A dual/quad 4x8 dry spring matrix 80V 0.5A 30 MHz 500<50 uV backplate expandable, configured as
1-wire or 2-wire
universal module
34937A 28 channel C-type 300V 1A 10MHz N/A<3uV
4-channel A-type 250AC 5A<3uV
34938A 20 channel 5A type A 250AC 5A 10MHz N/A<3uV
RF and microwave modules
Module Description Insertion Isolation Frequency VSWR Input Annotation
Loss range impedance
34941A Four 1x4 50 Ω 2GHz and Factory 50 Ω
RF multiplexer
34942A 4x4 75 Ω RF and factory 75 Ω
Multi channel converter
34945A/microwave switch/attenuation can drive up to 64 external switch coils; 32 SPDT switches and 8 multi port switches.
34945EXT driver with 8 attenuators, or your own component combination. Other 34945EXT extensions are available.
34946A dual 1x2 SPDT with termination<0.42dB>85dB 40GHz or<1.15 50 Ω @ 4GHz
Microwave switch<0.69dB>67dB 20GHz<1.30 @ 20GHz
34947A Triple 1x2 SPDT with termination<0.42dB>85dB 40GHz or<1.15 50 Ω @ 4GHz
Microwave switch<0.69dB>67dB 20GHz<1.30 @ 20GHz
system control
Module Description
34950A 64 bit digital I/O, 8-bit digital I/O with programmable polarity, threshold up to 5V, 7 handshake protocols and code types
Equipped with memory and counter memory; Two 10MHz frequency counters/adders and a 20MHz programmable clock output.
34951A 4-channel isolated digital to analog conversion outputs a DC voltage of ± 16V and a DC current of ± 20mA; The output waveform has a frequency of 200KHz
Device with waveform memory update rate and 16 bit resolution; Establish a memory with over 500000 points on the circuit board
Point to point waveform.
34952A multifunctional module with 4 8-bit digital I/O channels, 2 ± 12V analog outputs, and 1 100KHz gating
32-bit DIO, A two-way summation device.
Dao D/A and summation device
The 34959A circuit test board module can access+12V and+5V power supplies, 16 GPIO ports, and 32 relay drive lines
Custom design.
|