Real time monitoring of sizing rate using an online monitoring instrument for sizing process concentration

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The online monitoring instrument for sizing process concentration has good measurement stability, high accuracy, simple and convenient operation, low maintenance, and reliable work. It can be directly installed on production pipelines or tank containers for 24-hour continuous measurement and analysis. Reducing manual and systematic errors in traditional laboratory analysis, reducing the workload of laboratory analysts, and saving human resources.

Product Details

Product Introduction

The carbon fiber sizing line usually includes the following steps: sizing agent preparation tank, storage tank, circulating feed pump, sizing tank, and overflow recovery pipeline.Online monitoring instrument for sizing process concentrationCan be installed in the following two key positions.

Installed in the circulation loop of the sizing tank. When carbon fibers continuously pass through the sizing tank, some of the sizing agent is carried away by fiber adsorption, and at the same time, the concentration increases due to water evaporation. A refractometer is placed between the bottom outlet of the sizing tank and the inlet of the circulation pump to monitor the dynamic concentration in real time.

Installed on the main supply pipeline. A large production line is equipped with an independent feeding unit, and a refractometer is used to monitor the concentration of the diluted slurry supplied to the sizing tank, in order to promptly detect any deviation in the ratio.

technical advantage

No pre-treatment of the sample, no need for reagents or consumables, the entire measurement process takes seconds.
A long-lasting light source that lasts up to 100000 hours, reducing usage and maintenance costs.
Optional components are available for fully automatic cleaning of the optical window to avoid measurement deviation caused by contamination.
Some materials are not affected by color, turbidity, or viscosity.
The algorithm ensures that some materials in the measurement results are not affected by bubbles, solid impurities, and crystals in the detection object.
Not affected by pressure changes, sudden changes in flow rate, or turbulence phenomena of the detected object.
The instrument has no mechanical action during the detection process, ensuring long-term stable use.
Detect the full planar structure of the prism to avoid dirt and grime accumulation in the optical window.
Factory calibration and automatic temperature compensation, directly put into use.

technical parameters

Product Model	CYR-G
measurement project	Refractive index, temperature, concentration
measurement range	0-40%
resolution	0.01%
measurement accuracy	± 0.1%
measure temperature	-20 to 100 ℃
temperature compensation	0-100°C
Process temperature	-20°C up to +100°C
prism material	Optical grade sapphire
Liquid contact material	316L optional: Hastelloy C-276, 2205, 20 alloy, titanium, tantalum, etc
input power	DC24V
signal output	DC4 to 20mA&RS485; 2-channel switch signal output
protection level	IP65
Process pressure	≤ 1 MPa (10 Bar), higher pressure levels can be customized
Size and Weight	￠ 109 * 138mm/approximately 1.87KG
Cleaning options	Optional automatic cleaning component
Installation Options	Chuck, flange pipe adapter, small diameter adapter, material: 304, 316L, 2205, PP or steel lined fluorine
Other functions	The operation panel can view data such as concentration, temperature, refractive index, etc., and supports functions such as fault code prompt, one click zero calibration, and factory reset