Reactor sampler

1、 Product Introduction

Reactor sampler closed loop samplingIt is sampling for intermediate indicator detection in the reaction process, namely central control detection sampling. The sampler consists of several parts, including an inner tube nitrogen blowback valve, a clean power pump, a clean level sampling valve, a circulating reflux tube, and a sampling bottle.

Reactor sampler closed loop samplingContinuous or intermittent sampling can be carried out during the reaction process without affecting the reaction process of the reactor. The power pump or circulating sampling of the reaction materials ensures the representativeness of the sampling. Excess materials before and after sampling can be refluxed to the reactor, reducing unnecessary waste of materials and minimizing environmental pollution. At the same time, the closed online sampler of the reaction kettle adopts a fully enclosed structure to avoid pollution and the occurrence of running, running, dripping, and leakage phenomena, which can be widely used in the fine chemical and pharmaceutical fields for pollution-free online sampling.

2、 Product Structure

3、 Product Features

1. The sampler adopts a power pump as the power source, which can be widely used in flammable, explosive and other environments

2. The sampler design adopts a clean level design, with pipelines and valves *, and no residue between product batch switching and sampling intervals, making it easy to clean

3. According to user requirements, circulating water cooling modules and large particle material modules can be installed, using cooling water or low-temperature refrigerant cooling to meet the needs of high-temperature sampling and large particle material sampling

4. For sampling of highly corrosive materials, Hastelloy alloy inner tubes, PTFE power pumps, PTFE lined valve fittings can be used to meet online sampling in highly corrosive environments

5. The nitrogen blowback interface can be connected to high-pressure gas to clear the pipeline when it is blocked, and to clean the pipeline and system with cleaning solution during cleaning

4、 Product selection

Product selection can be considered from the following aspects:

1. Material temperature

2. Particle size of materials

3. Material viscosity

4. Material corrosiveness

5. Tube length inside the reaction vessel

6. Interface size of reaction kettle

7. Explosion proof grade requirements

8. Reactor pressure rating