- Phone
-
Address
Yintun Village, Daguozhuang Town, Xian County
Product Categories
Cangzhou Xinke Construction Instrument Co., Ltd
Prefabricated concrete partition wall impact test device
NegotiableUpdate on 06/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The impact test device for prefabricated concrete partition walls consists of two tires, a counterweight block, and other connecting components. The pressure inside the tires should be 0.35MPA; The total weight of the impact body of the internal partition wall should be 30kg; #177; 0.1kg, The total weight of the impact body for the partition wall should be 70kg; #177; 0.1kg。
Product Details
Prefabricated concrete partition wall impact test device
Prefabricated concrete partition wall impact test deviceThe impact body consists of two tires, a counterweight, and other connecting components, and the pressure inside the tires should be0.35MPAThe total weight of the impact body of the internal partition wall should be30kg±0.1kg,The total weight of the impact body of the partition wall should be70kg±0.1kg.
1The suspension point of the impact body should be strong enough, and the suspension rope should be of diameter5mmStainless steel wire.
2When the impact body and suspension rope are in a free state, the distance between the outer edge of the tire and the surface of the specimen should be greater than5mm, and less than15mmThe geometric center of the impact body should be located at the point of impact being measured50mmWithin the radius of a circle.
3The impact release device should be able to accurately locate the impact height of the impact body, maintain the centerline of the impact body and the suspension rope on the same straight line, and ensure that the impact body can swing freely after being released.
Similar Product Recommend
