Portable reactor lifting device

The portable reactor lifting device, with its characteristics of safety, precision, efficiency, and economy, effectively solves the pain points in reactor lifting, especially suitable for situations with limited space and high safety requirements. It is a powerful tool to ensure the safe installation and maintenance of power equipment.

Portable reactor lifting device is a specialized and movable lifting tool, mainly used for safe and efficient lifting of dry-type or oil immersed reactors in substations, power testing laboratories, industrial sites and other occasions. Compared with traditional large cranes, it is more flexible, targeted, and economical, especially when working indoors with limited space or where cranes cannot enter, or within existing substation intervals, it has irreplaceable advantages.

In order to better perform the series resonance withstand voltage test, UHV has launched a series resonance dedicated elevator, which is suitable for the stack height of 6 reactors and can weigh 150-200kg. The series resonance elevator is made of high-strength and high-quality aluminum alloy material, which has the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability, and is also a test helper for series resonance withstand voltage test.

Product features:

1. A single set of high-strength mast lifting platform, with light weight and good maneuverability, suitable for single person operation.

2. The specially designed guide wheel device between the mast and column can lift smoothly and freely.

3. The UHV (D) portable reactor lifting device has a compact structure, small transportation dimensions, and can enter the car of a general elevator as well as smoothly pass through doorways and narrow passages.

4. The dual protection leg structure ensures safer work and allows for close proximity to the work surface for lifting and lowering operations.

Technical parameters of UHV (D) portable reactor lifting device:

Applicable subjects	Pile height of series resonant test reactor
lifting height	Elevation: 6M
load-bearing	150kg-200kg
purpose	Number of reactor stack high nodes assisting in series resonance test
Scope of application	Cable frequency conversion resonant device
	Generator AC voltage withstand device
	AC voltage withstand resonant device for electrical equipment in substations
	Resonant boost device for CVT inspection

Typical workflow:

On site investigation and plan formulation: Determine the weight, size, lifting path, on-site space, and lifting point conditions of the reactor.

Device assembly: Quickly assemble the portable device into shape next to the reactor or at a predetermined location.

Trial lifting and balancing: Hang the specialized lifting device, conduct a small trial lifting, adjust the center of gravity to ensure the level of the reactor.

Formal lifting and movement: steadily lift the reactor to a safe height, and transport it above the installation position by manual pushing or the device's built-in movement function.

Accurate alignment and installation: Using the fine-tuning function, slowly descend and accurately align the foundation bolts to complete the positioning.

Dismantling and removal: Release the lifting equipment, dismantle the device, and clean the site.

Application Scenario:

Substation maintenance and expansion: Replace faulty reactors or add reactor units to operating stations.

Installation of power distribution room: The indoor space is narrow and large machinery cannot enter.

Manufacturing and testing of power equipment: handling reactors in production lines and testing stations.

Emergency repair: Quick response, equipment can be immediately put into use upon arrival at the site with the construction vehicle.

Installation of filtering reactors in new energy stations, such as wind farms and photovoltaic power stations.

Product Portfolio

Product detail images

Reactor lifting device

Reactor lifting device

top details

Lifting hook

base

Partial base

electric motor

electric motor

control handle