- Phone
-
Address
Jinze Industrial Park, Qingpu District, Shanghai
Product Categories
- Subsea pump model _ Subsea pump picture
- Deep well pump model _ Deep well pump picture
- Self priming pump model _ Self priming pump picture
- Centrifugal pump model _ Centrifugal pump picture
- High pressure pump model _ High pressure pump picture
- Diaphragm pump model _ Diaphragm pump picture
- Submersible pump model _ Submersible pump picture
Shanghai Boyu Pump Industry Co., Ltd
Pneumatic diaphragm pump QBK
NegotiableUpdate on 05/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
QBK pneumatic diaphragm pump has four materials: plastic, aluminum alloy, cast iron, and stainless steel. Pneumatic diaphragm pumps use nitrile rubber, chloroprene rubber, fluororubber, polytetrafluoroethylene, and polytetrafluoroethylene according to different liquid media. To meet the needs of different users. Placed in various special occasions for pumping media that conventional pumps cannot pump, satisfactory results have been achieved.
Product Details
1、 Brief Introduction to QBK Pneumatic Diaphragm Pump
QBK pneumatic diaphragm pump is the third generation pneumatic diaphragm pump developed by our company, which has the advantages of long service life and non-stop operation. It can pump flowing liquids and transport some non flowing media, and has many advantages of conveying machinery such as self-priming pumps, submersible pumps, shielded pumps, mud pumps, and impurity pumps. So since its birth, pneumatic diaphragm pumps have gradually entered the market of other pumps in the world and occupied a part of it. For example, pneumatic diaphragm pumps have taken a dominant position in the paint and ceramic industries, while in other industries such as environmental protection, wastewater treatment, construction, sewage, and fine chemicals, they are expanding their * and have an irreplaceable position compared to other pumps.
2、 Advantages of QBK Pneumatic Diaphragm Pump
1. Due to the use of air as a power source, the flow rate automatically adjusts with changes in back pressure (outlet resistance), making it suitable for fluids with medium to high viscosity. The working point of a centrifugal pump is set based on water. If it is used for fluids with slightly higher viscosity, it needs to be matched with a reducer or frequency converter, which greatly increases the cost. The same applies to gear pumps.
2. In the handling of hazardous and corrosive materials, pneumatic diaphragm pumps can isolate the materials from the outside world.
3. Pneumatic diaphragm pumps are used in harsh construction sites, such as construction sites and industrial and mining wastewater discharge. Due to the high impurities and complex composition in the wastewater, the pipelines are prone to blockage, which can cause excessive load on the electric pump and make the motor vulnerable to heating. Pneumatic diaphragm pumps can pass particles and have adjustable flow rates, automatically stopping until unobstructed when the pipeline is blocked.
4. In addition, the pneumatic diaphragm pump has a small volume, is easy to move, does not require a foundation, occupies a very small area, and is easy and economical to install. Can be used as a mobile material conveying pump.
5. Or ensure that there are no impurities contaminating the raw materials in some experiments.
6. Pneumatic diaphragm pumps are reliable and cost-effective for use in flammable and explosive environments, such as fuel and explosion transportation, because: *, sparks cannot be generated after grounding; Secondly, there is no heat generated during work, and the machine will not overheat; Thirdly, the fluid will not overheat because the pneumatic diaphragm pump has minimal agitation on the fluid.
Similar Product Recommend
