Plastic rubber pneumatic slicer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

K-QP3 plastic rubber pneumatic slicer, also known as pneumatic punching machine, is used for making samples of rubber and plastic insulation sheaths of wires and cables, making them into standard shaped test pieces for testing purposes.

Product Details

K-QP3plastic rubberPneumatic slicer(Pneumatic punching machine, used for insulation, sheath, rubber, plastic, etc. of wires and cables)

1plastic rubberPneumatic slicerProduct Introduction

Commonly used to cut insulation and sheath materials of rubber, plastic, wires and cables into standard shaped test pieces for testing purposes.

When cutting test pieces, according to customer needs, configure cutting dies according to GB/T529-2008, GB/T528-2009, GB/T2951.11-2008 standards to cut rubber standard test pieces for aging, thermal extension, tensile testing, and tear strength testing.

IIplastic rubberPneumatic slicerMain technical parameters

1. Produce dumbbell test pieces with a thickness of 0.8-2.0mm

2. Impact stroke: 110mm

3. Gas source pressure: 0.8MPa;

4. Impact force: about 1.5T;

5. Sample table: 140mm × 300mm;

6. National standard dumbbell knife mold: 50mm × 8.5mm × 4mm, 75mm × 12.5mm × 4mm;

7Dumbbell knife mold定制。