Plant light incubator manufacturer

The manufacturer of the plant light cultivation box has super temperature and sensor abnormality protection functions, ensuring the safety of the instrument and samples; Choosing a full spectrum plant growth lamp is beneficial for plant growth and improves disease resistance.

The manufacturer of the plant light cultivation box has super temperature and sensor abnormality protection functions, ensuring the safety of the instrument and samples; Choosing a full spectrum plant growth lamp is beneficial for plant growth and improves disease resistance.

Equipped with power-off memory and automatic power-off time compensation function; Constant temperature control system, fast response, high temperature control accuracy.

Microcomputer fully automatic control, touch switch, easy to operate; Programmable multi-stage control mode, temperature, humidity, light intensity, and time can be set separately during both day and night.

Air duct ventilation, with soft air velocity and uniform temperature in the working room; Adopting hollow reflective tempered laminated glass, it has good insulation performance and is aesthetically pleasing.

Optional fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.

Instructions for Use:

1. Connect the power supply, turn on the power switch, and the whole machine will be powered on. The power indicator light inside the switch will light up.

2. Please refer to the manual of the intelligent digital temperature controller for temperature control settings.

3. If lighting is required, turn on the lighting switch.

4. This incubator has a breakpoint protection function and a delay function of about one and a half minutes. It takes about one and a half minutes to restart the compressor after it stops.

Maintenance and cultivation:

1. The outer shell of the incubator should be reliably grounded.

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and direct sunlight. Place it steadily to prevent vibration and noise.

3. To effectively dissipate heat from the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a 50mm gap on the side of the box, and at least 300mm of space at the top of the box.

4. When handling, repairing, and maintaining the incubator, collision, shaking, and vibration should be avoided; The maximum inclination is less than 45 degrees.

5. The instrument suddenly doesn't work. Please check if the fuse tube (behind the box) is burnt out and check the power supply.

6. When cooling this incubator, it is not advisable to make the temperature difference between the incubator and the ambient temperature greater than 25 degrees.