Constant temperature oscillation incubator manufacturer

Precautions and maintenance of Changzhou constant temperature oscillation incubator manufacturer: 1. The instrument should not be used under high voltage, high current, and strong magnetic field conditions to avoid interference with the temperature controller and the risk of electric shock. two The outer shell of the incubator must be effectively grounded for safe use. This product has undergone strict debugging before leaving the factory, and the temperature controller menu setting data should not be modified arbitrarily. four Do not place flammable and explosive materials for heating to prevent danger. five Electroplated parts and surface paint should be kept clean regularly. If not in use, neutral grease or Vaseline should be applied to the plated parts to prevent corrosion. A plastic film dust cover should be placed outside the incubator and placed in a dry room to prevent damage to the temperature controller caused by moisture.

1. The outer box of this equipment is made of cold-rolled steel plate, with an electrostatic spraying process on the surface. The inner box is made of stainless steel, and the insulation layer is formed by polyurethane foam. The transparent window is made of double-layer glass to ensure the insulation performance inside the box (low temperature incubators and BOD incubators that require no light transmission do not have glass windows). There are cold and hot air ducts inside the box to ensure smooth gas circulation and more uniform temperature inside the box.

2. The temperature control system of the equipment and the electronic circuit of intelligent applications achieve analog control. Adopting a self-adjusting PID system, the heating execution system adopts "zero crossing" contactless switch circuit technology, thus achieving pulse width modulation heating, making its temperature control fluctuation range less than or equal to 1 ℃.

Constant temperature oscillation incubator manufacturerPrecautions

a) After the device lands, if the ground is uneven, it should be leveled with a cushion.

b) The movement of the equipment should be parallel, and the inclination angle in any direction should be less than 45 degrees.

c) When this device is operating normally, the placement of the contents inside the box should not affect air circulation, and the temperature inside the box should be uniform.

d) The inner lining of the box wall and the surface of the equipment should be wiped regularly to maintain cleanliness.

e) If the device is not in use, the power cord should be disconnected to prevent the device from being charged and causing injury. And it should be operated regularly (usually once a quarter) for 2-3 days according to the usage conditions to remove moisture from electrical components and avoid damaging related devices.

f) If the product malfunctions, it should be repaired and resolved by personnel.