Changzhou laboratory waterproof incubator manufacturer

Changzhou laboratory waterproof incubator manufacturerThe laboratory isolated water culture box and mold culture box used in production are constant temperature cultivation devices for the cultivation and breeding experiments of molds and microorganisms. They are ideal equipment for scientific research and production in fields such as biotechnology, medical research, agricultural and forestry science, aquaculture, and animal husbandry.

1、 The laboratory waterproof incubator produced by Changzhou laboratory waterproof incubator manufacturer has the function of laboratory waterproof incubator

1. The laboratory's water-resistant incubator is controlled by a microprocessor and has functions such as monitoring, temperature control, and protection. The lighting inside the box can observe the culture inside the box. Stainless steel liner, corroded.

IIThe structural characteristics of the laboratory's water-resistant incubator for production

1. The outer box of this equipment is made of cold-rolled steel plate, with an electrostatic spraying process on the surface. The inner box is made of stainless steel, and the insulation layer is formed by polyurethane foam. The transparent window is made of double-layer glass to ensure the insulation performance inside the box (low temperature incubators and BOD incubators that require no light transmission do not have glass windows). There are cold and hot air ducts inside the box to ensure smooth gas circulation and more uniform temperature inside the box.

2. The temperature control system of the equipment and the electronic circuit of intelligent applications achieve analog control. Adopting a self-adjusting PID system, the heating execution system adopts "zero crossing" contactless switch circuit technology, thus achieving pulse width modulation heating, making its temperature control fluctuation range less than 0.5 ℃.

IIIInstructions for using the laboratory's water-resistant incubator for production

1. Usage conditions:

A、 Environmental temperature: 10-30 ℃;

B、 No strong light, no strong corrosive gases, good ventilation, relative humidity below 85%;

C、 Power supply:~200V ± 10%, 50HZ. Capacity not less than 1KW, equipped with a grounded power socket;

2 Usage:

A、 Power on: Insert the three pin plug into the power socket, set the power switch on the panel to the "on" position, and the instrument will display a number indicating that the device has entered the working state.

B、 Place the setting measurement switch in the set position, adjust the temperature control knob or touch key, and observe the digital temperature gauge reading to obtain the desired set temperature value. Set the setting measurement switch to the measurement position, and the device will enter the automatic temperature control working state. The three indicator lights of heating, cooling, and protection alternate to indicate the working status of the equipment.

C、 When sterilizing the mold incubator, turn on the sterilization light switch.

D、 Intelligent and special requirements require separate user manuals.

4Precautions for the production of laboratory waterproof incubators

a) After the device lands, if the ground is uneven, it should be leveled with a cushion.

b) The movement of the equipment should be parallel, and the inclination angle in any direction should be less than 45 degrees.

c) When this device is operating normally, the placement of the contents inside the box should not affect air circulation, and the temperature inside the box should be uniform.

d) The inner lining of the box wall and the surface of the equipment should be wiped regularly to maintain cleanliness.

e) If the device is not in use, the power cord should be disconnected to prevent the device from being charged and causing injury. And it should be operated regularly (usually once a quarter) for 2-3 days according to the usage conditions to remove moisture from electrical components and avoid damaging related devices.

f) If this device malfunctions, it should be resolved by personnel or maintenance.