Constant temperature oscillation incubator

Instructions for using the oscillation incubator produced by Changzhou oscillation incubator manufacturer: 1 The oscillation incubator produced by Changzhou oscillation incubator manufacturer should be placed on a flat ground, with a clean and tidy environment, dry and ventilated. two Before using the oscillation incubator produced by Changzhou oscillation incubator manufacturer, all control switches should be in non working state, and the speed control knob of the oscillation incubator produced by Changzhou oscillation incubator manufacturer should be placed in the Z small position. three To ensure good balance performance of the instrument during oscillation and avoid significant vibrations, all test bottle positions should be filled with approximately equal amounts of culture solution when bottling. If the culture medium is insufficient, the test bottle can be placed symmetrically.

The constant temperature oscillation incubator, also known as the air full temperature constant temperature shaker, is a biochemical device that combines a temperature controlled incubator and an oscillation incubator. It is a laboratory equipment used for precision cultivation and preparation in scientific research, education, and production departments such as plants, biology, microbiology, genetics, viruses, environmental protection, and medicine. It is temperature controlled and digitally displayed. Set up oxygen replenishment holes and ensure sufficient oxygen replenishment in the constant temperature working chamber. Equipped with mechanical timing and intelligent timing for temperature control. The spring bottle rack is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments. Infinite speed regulation ensures smooth operation. Easy to operate and safe.

Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode. Connect the power and set the timer according to the surface scale of the chassis. If you need to work for a long time, adjust the timer box to the "normally open" position. Place the control switch in the "Settings" section, and the temperature displayed on the screen will be the set temperature. Adjust the knob to set it to the desired temperature for your work. Place the control switch on the "measurement" end, and the temperature displayed on the screen will be the actual temperature of the air inside the test chamber. As the temperature inside the chamber changes, the displayed number will also change accordingly. When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin.