Pick ball rebound coefficient tester

HT-6023-CORPick ball rebound coefficient tester

Explanation:

Pick ball rebound coefficient testermainly used forSimulate the impact speed of a Pik ball and test its rebound speed after rebounding

Main technical parameters:

1.Serving equipment: Pneumatic (air source provided by the customer)

2. Large caliber solenoid valve

3. Electric proportional valve (Japanese SMC), computer input pressure, automatic adjustment of air pressure to meet the speed of balls with different diameters

4. Provide a testing steel frame and space for serving and returning the ball, with a rest area inside(Approximately) 250 * 120 * 200 (L * W * H) CM

5. The bottom of the test is designed with a slope, which allows the test ball to automatically roll back to the ball collection point below the serving end of the machine

6. Specialized analysis software for computer system acquisition

7. Speed sensor: photoelectric sensor accuracy+/-0.03m/sec

8. A frame with an entrance of 30.38cm

9. A distance of 30.48cm in front of the impact plate is used as the first set of sensing speed devices, and another distance of 30.48cm is used as the second set of sensing devices

The second group of sensory devices should be adjacent to the entrance frame by no more than 10cm, and the distance between the entrance frame and the ball launch port should be less than or equal to 244cm

10. Pick ball diameter: 74mm Ball speed: 26.82m/s Ball weight: 26g

11. Power supply: AC 220V 50HZ