Baseball, Softball, Hockey, Pick Ball Rebound Coefficient Testing Machine

HT-6023-COR Baseball, Softball, Hockey, Pick Ball Rebound Coefficient Testing Machine

purpose：

Baseball, Softball, Hockey, Pick Ball Rebound Coefficient Testing MachineMainly used to simulate a ball receiving a certain hitting speed, and after rebounding, test the rebound speed of the ball.

to meetNOCSAE DOC ND049-19standard

Main technical parameters ：

1. Serving equipment: Pneumatic (air source provided by the customer)air pressure≥0.5mpa；

2. Large caliber solenoid valve instantly releases air pressure to provide launch power for the softball;

3. Electric proportional valve (Japanese SMC), computer input pressure, automatic adjustment of air pressure to meet different diameter balls

The speed;

4. Provide a testing steel frame and space for serving and returning the ball

Internal rest area (approximately) 250 * 120 * 200 (L * W * H) CM

5. Rebound impact plate: steel electroplating,size ：6 1*6 1cm, Thickness (approximately): 5.08cm

6. The bottom of the test is designed with a slope, which allows the test ball to automatically roll back to the ball collection point below the serving end of the machine

7. Special analysis software HT-6023 for computer system acquisition

8. Speed sensors: 3 sets of Keyence FS-N40, 3 sets of light curtain sensing devices; Response time 23 μ S;

9.The entrance is 30.38cm frame The distance between the impact plate and 30.48cm is the first set of induction velocity devices, and another distance of 30.48cm is used to set the second set of induction devices. The third set of induction devices is adjacent to the entrance frame by no more than 10cm, and the distance between the entrance frame and the ball launch port is less than or equal to 244cm

10.The software can freely set the softball launch speed and automatically adjust the air pressure；

11. The software displays the launch speed, rebound speed, and speed rebound coefficient; speed error±5%；

12. Calculate the rebound coefficient using the launch speed and rebound speed;

13. Provide softball testing molds for testing fixtures; The softball is installed inside the mold, and the mold carries the softball for launch;

14. Power supply: AC 220V 50HZ power 350w