Petroleum fully automatic closed flash point tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The NJ-SCBS-200 petroleum fully automatic closed flash point tester adopts a new high-speed signal processor control, adaptive PID control algorithm, and automatically adjusts the heating curve according to standard requirements. It is equipped with an automatic atmospheric pressure detection chip, which automatically measures, corrects and corrects the flash point value of atmospheric pressure. Applied in departments such as petroleum, chemical, power, environmental protection, railway, and scientific research, it is an ideal instrument for conducting closed flash point testing.

Product Details

NJ-SCBS-200Petroleum fully automatic closed flash point testerUnder specified conditions, when the oil is heated to a certain temperature, the mixture of oil vapor and surrounding air will ignite upon contact with the flame. The low flash temperature is called the flash point value of the oil. Fully automatic closed flash point tester according to national standardsGB/T261-2008Determination of Flash Point by Binsky-Martin's Closed Cup Method "andASTMD93The regulations require manufacturing and application in departments such as petroleum, chemical, power, environmental protection, railway, and scientific research, making it an ideal instrument for conducting closed flash point testing.

NJ-SCBS-200Petroleum fully automatic closed flash point testertechnical parameters

display mode	5inch65K(Resolution)800*600）Chinese touch screen display
Measurement method:	Thermocouple differential detection formula
Measuring range:	room temperature-350℃ resolution0.1℃
Ignition method:	No gas source electronic ignition
Repeatability:	National standard: flash point value<104Allowable deviation at ℃ ±1℃, flash point value ≥104Allowable deviation at ℃ ±2℃ International standard: Flash point value ≤110Allowable deviation at ℃ ±1℃, flash point value>110Allowable deviation at ℃ ±2℃
printer:	Low energy high-speed thermal printer,56Millimeter paper width
Temperature detection	Imported platinum resistor（Pt100Ω)
Cooling method:	forced air cooling
Self checking function:	Automatic diagnosis of instrument faults
Dimensions and weight:	450X280X290 mm、5kilogram

NJ-SCBS-200 Fully Automatic Closed Flash Point TesterFunctional Features

1. Adopting a new high-speed signal processor control, adaptivePIDControl algorithm, automatically adjust the heating curve according to standard requirements

2. Built in atmospheric pressure automatic detection chip, automatic measurement, calibration and correction of atmospheric pressure, and automatic correction of flash point value.

3. Automatic measurement completion of lifting, mixing, ignition, detection, alarm, cooling, and printing instruments

4. Safe without gas source, platinum alloy electric heating wire ignition method, safe, stable, reliable, high testing accuracy

5. Differential detection, automatic correction of system deviation, automatic stop detection and alarm for temperature *

【execution standard】

GB/T261-2008 "Determination of flash point Binsky

-Martin's Closed Cup Method ASTMD93
【Standard Configuration】

Fully automatic closed flash point tester host, oil cup, printing paper, power cord, etc

Optional accessories: printing paper, ignition wire, oil cup, etc