Our company (Dongguan Meinuo Automation) specializes in the production and sales of rodless cylinders, focusing on the research and optimization of core products. Among them, the OSPP-C series is the main model, which has won market recognition with outstanding advantages. This series adopts a raised slider design, which can directly replace the P210 old mechanical rodless cylinder. The cylinder diameter covers Ø 25/32/40mm, equipped with high-quality rubber sealing structure, excellent air tightness, low leakage, and low operating noise. The three sides of the cylinder body are integrated with dovetail groove guide rails, which can directly install sensors, guide rails and other components without the need for additional brackets. The optimized profile balances rigidity and lightweight, and is matched with corrosion-resistant stainless steel sealing tape to adapt to harsh working conditions such as high dust, high load, high frequency and high speed. It is easy to maintain and has a long service life.

-----------------------------------------------------------------------------

Our company produces rodless cylinder catalog:

-----------------------------------------------------------------------------

Parker high slider rodless cylinderparameter

This equipment is suitable for dry filtered compressed air that complies with ISO 8573-1:2010 3.4.3 level. The dew point at room temperature should reach+3 ℃. It is recommended to use a tubular dryer in low-temperature environments and can be supplied with conventional air compressors and standard filtration devices. The maximum working pressure of the equipment is 8 bar, and the temperature adaptation range is wide. The conventional version is suitable for temperatures ranging from -20 ℃ to+80 ℃, while the low-temperature version can reach -40 ℃ to+80 ℃. The product has undergone pre lubrication treatment before leaving the factory, and no additional oil maintenance is required in the later stage. The overall structure is corrosion-resistant, resistant to chemical media, and has strong environmental adaptability.

-----------------------------------------------------------------------------

Summary of PARKER rodless cylinder selection rules

1. Series ClassificationIncludes OSP-P, OSP-L, and OSPP-C series;

2. Optional cylinder diameter: 10, 16, 25, 32, 40, 50, 63, 80;

3. Function configuration codePiston installation, air source interface, sealing material, lubricating grease, and fixing screws are all distinguished by numbers, with 0 as the standard configuration and other numbers corresponding to special customized versions;

4. Travel itinerary annotationRepresented by five digits, customizable length as needed;

5. customized areaReserve multiple codes for customized requirements of guide rails, installation accessories, and special working conditions.

Select all optionsStandard configuration (all codes are 0)Under the premise of, the model can be greatly simplified, and the simplified format is:Serial number - cylinder diameter - strokeThe itinerary supports free customization of 1-6000mm, and the selection labeling is more concise and intuitive.

-----------------------------------------------------------------------------

perspective

Parker high slider rodless cylinderMaterial Specifications

Cylinder profile, piston __________ anodized aluminum

End cap ________________ anodized aluminum

Sealing ring _________________ Nitrile rubber (optional: Fluororubber)

Supporting ring ________________ polyoxymethylene

Sliding tile/slider __________ polyamide

Sealing tape ________________ quenched stainless steel

Screws and nuts made of galvanized steel

Installation parts: Galvanized steel and aluminum alloy

Sliding guide rail, slide table, guide rail ____ anodized aluminum

Low friction material _________ polyethylene

Roller guide rail, slide table _________ anodized aluminum

Rolling bearings made of quenched steel

Guide rail ________________ quenched steel

-----------------------------------------------------------------------------

OSPP-C rodless cylinder is a combination linear actuator, with cylinder diameter specifications covering? 25? 32? 40mm， It can be flexibly matched with guidance devices and complete control components, and its additional functions adopt modular system component design to adapt to various scene requirements, combining practicality and flexibility.

The core advantage of this actuator lies in convenient installation and structural optimization: the three sides of the cylinder are equipped with dovetail groove installation tracks, which can directly install modular components such as linear guides, valves, magnetic switches, etc. on the cylinder, effectively solving various installation problems, especially suitable for scenarios with limited installation space. At the same time, it provides customers with a flexible installation solution in QUAN orientation for customized functions. The optimized cylinder profile achieves a WAN balance between maximum stiffness and minimum weight; Paired with corrosion-resistant stainless steel outer steel strip sealing and a powerful dust scraping system on the piston, the actuator can stably adapt to harsh working environments; The high-tech polymer inner dust-proof tape further ensures the best sealing effect and extremely low friction coefficient required for high-performance operation.

OSPP-C rodless cylinder has a long service life, with a maintenance free interval of up to 6000 kilometers. It has a wide range of temperature adaptability, with the conventional version ranging from -20 ° C to+80 ° C. At the same time, it provides a low-temperature option that can adapt to environments as low as -40 ° C. It is an ideal choice for point-to-point operation, reciprocating motion, and simple guidance/transportation applications.

Optional configurations and special versions

-Stainless steel version: suitable for continuous humid environments, all screws are made of A2 quality stainless steel (material grade 1.4301/1.4303), with better corrosion resistance.

-Low temperature series: specially adapted to low temperature environments, ZUI can withstand a low temperature of -40 ° C at the JI end, ensuring stable operation under low temperature conditions.

-End face cylinder interface version: equipped with a special end cap, the pneumatic connection is set on the end face (instead of the standard side interface). The special end cap can rotate 4 × 90 °, making it easy to adjust the buffer adjustment screw to the appropriate position and adapt to specific installation requirements.

-Same side dual cylinder interface version: adopts a special end cover design, with two cylinder interfaces concentrated on the same end cover, suitable for small space, easy installation, or specific processing requirements; The supply of air to the other end of the cylinder is achieved through an internal channel (compatible with OSP-L25 to L40 models).

-Built in 3/2-way VOE valve: The 3/2-way valve is integrated and installed on the cylinder end cover to form a compact and complete control solution, which facilitates cylinder positioning and enables smooth operation at low speeds and fast responses, making it more suitable for direct control in production and automation processes.

-Dual cylinder connection: Combining two OSPP-C cylinders of the same size into a compact high-performance unit to enhance load capacity and operational stability.

-Multi cylinder connection: Combine two or more OSPP-C cylinders of the same size into a compact high-performance unit, with freely selectable slider direction, flexibly adapting to multi load and multi station requirements.

-Magnetic switch: available in four types: RS, ES, RST, EST, it can accurately sense the position of the middle and both ends of the cylinder, achieving precise position detection and control.

-Pin axis installation: It can compensate for installation tolerances and also compensate for the degree of freedom deviation caused by external linear guide driven loads, improving installation accuracy and operational stability.

-End cap installation: specially designed for cylinder end cap installation, suitable for specific installation scenarios, and simplifies the installation process.

-Intermediate support: Install according to the stroke length and load capacity to avoid excessive bending and oscillation of the cylinder; The maximum allowable bending between two intermediate supports is 0.5 millimeters, and the support is clamped on the dovetail shaped profile of the cylinder barrel while being able to withstand axial forces.

-Double piston cylinder: equipped with two pistons, it can withstand higher loads while increasing support stability and adapting to heavy load conditions.

-Inverted installation: Turn the installation load in the opposite direction, suitable for dirty environments, to reduce the impact of dust and other impurities on the actuator.

-Sliding rail version: using economical and efficient sliding bearing rails, suitable for medium load application scenarios, with outstanding cost-effectiveness.

-Screw guide rail: equipped with ball screw ball bearing guide rail, suitable for heavy-duty and precision operation scenarios, ensuring operational accuracy and load capacity.

-Multiple braking VS versions: Provides multiple braking options to achieve simple travel limited braking, improving operational safety and controllability.

-----------------------------------------------------------------------------

Model of rodless cylinder:

• OSPP32C000001350000C00000

• OSPP32C100001850000000000

• OSPP32C212000465000C00000

• OSPP32C100001950000000000

• OSPP32C000001720000C00000

• OSPP32C000001600000000000

• OSPP32C000000005000C00000

• OSPP32C200000490000000000

• OSPP32C00000230000000X000

• OSPP32C000002320000000000

• OSPP32C000000200000C00000

• OSPP32C000000600000000000