PID gas detector DraegerXpid volatile organic compounds

PID gas detector DraegerXpid volatile organic compounds

Multiple gas detectors

Selective volatile organic compound (VOC) gas detection

Used for frequent testing of toxic and carcinogenic substances

Extremely low concentration test results of laboratory quality can be obtained

Can detect benzene at concentrations above 50 ppb

No consumables are required for each measurement

PID gas detector DraegerXpid volatile organic compounds

Two modes for effective measurement

The "inspection" mode is a broad-spectrum measurement method used for pre detection and positioning of measurement points. It can continuously and directly read the total concentration measurement values of all volatile organic compounds. The "inspection" mode is similar to using a single PID gas measuring device.

The 'analysis' mode allows for selective measurement to monitor specific toxic compounds. In just a few seconds, the pre selected target compound can be accurately measured. The 'analysis' mode is similar to gas chromatography analysis performed in a laboratory.

Can save up to 90% of time

Dr ä ger X-pid 9000/9500 does not require preparation and can be used immediately after quick startup. The selective measurement in the "analysis" mode can be completed in just a few seconds. To perform benzene measurement, simply press the button and it will take 30 seconds to complete. After a 60 second interval, the device can measure benzene again. Compared to other detection systems, Dr ä ger X-pid 9000/9500 can save a lot of time and enable further monitoring. Simultaneously measuring other compounds such as benzene and butadiene further reduces detection time.

cost savings

Since the measurement does not require the use of consumables, it can reduce operating costs. For users with high measurement needs, Dr ä ger X-pid 9000/9500 can quickly recoup costs. For example, it does not require a pre detection tube, which makes it more convenient to use and prevents user errors. Based on 200 measurements per year, the Dr ä ger X-pid 9000/9500 is typically more cost-effective than similar measurement systems.

High selectivity, safer

The selective measurement "analysis" mode relies on the technique of separating individual compounds in a mixed gas. This makes it possible to perform specific compound measurements for benzene, even in the presence of high concentrations of other volatile organic compounds such as toluene and xylene. The cross sensitivity of benzene can be reduced to a low level. This can reduce false positive measurement results and false alarms.

Can maintain reliable performance even in harsh environments

The impact of various environmental factors (such as fluctuating ambient temperature or high humidity) on measurement results can be minimized. The sensor unit maintains a constant temperature above the ambient temperature and then separates the target compound from the mixed vapor. This ensures reliable measurement values can be obtained even under harsh environmental conditions.

Low detection limit

The concentration of toxic compounds in the air of the workplace shall not exceed the threshold limit. For carcinogenic vapors such as benzene, their time weighted average must be calculated within the low concentration range of ppb to ppm. The Dr ä ger X-pid 9000/9500 has been optimized to measure within this concentration range and can detect benzene at concentrations above 50ppb.

Intuitive operation through mobile applications

Control sensor units and process measurement data through a mobile application installed on explosion-proof smartphones (provided upon delivery). Adopting a large touch screen and familiar user interface elements for easy use. This enables a wide range of user groups to use complex technologies. No professional background knowledge or comprehensive training is required.

Measurement results with laboratory quality

Gas measuring equipment is based on gas chromatography analysis (GC) and photoionization detection (PID) technology. These techniques are commonly used in laboratories and are highly regarded for their excellent analytical performance. Dr ä ger X-pid 9000/9500 can directly apply these technologies to hazardous areas in all production sites.

Convenient functional testing and calibration

Functional testing can be completed in just two minutes using test gases isobutene and toluene, followed by the use of Dr ä ger X-pid 9000/9500. During the testing process, the system will gradually guide users to complete the user interface operations. The calibration will be completed in approximately four minutes.

Two models to meet different needs

There are two models of this product: 9000 and 9500. The target compounds detected by Dr ä ger X-pid 9000 include benzene and butadiene. The Dr ä ger X-pid 9500 can combine over 23 target compounds into a single analytical program, thereby expanding its application range. This means that you can independently expand the target substance database for Dr ä ger X-pid 9500.

Order Information
Explain the order number
Raw & & X-pid9000, including sensor unit, control unit, pre installed mobile applications, power supply, and charging
Wire, test gas adapter, and dust-proof and waterproof filtration membrane
6851847
Raw & & X-pid9500, including sensor unit, control unit, pre installed mobile applications, power supply, and charging
Wire, test gas adapter, and dust-proof and waterproof filtration membrane
6851848
Raw & & X-pid9500 AUS/SGP， Including sensor unit, control unit, and pre installed mobile applications, electricity
Source, charging cable, test gas adapter, and dust-proof and waterproof filtration membrane
6850014
Raw & & X-pid9500 CAN， Including sensor unit, control unit, pre installed mobile application, power supply
Charging cable, test gas adapter, and dust-proof and waterproof filtration membrane
6850015
将 Dräger X-pidMobile application upgraded from version 9000 to version 9500 6851849
Testing and Calibration Gas 58L
10ppm isobutene, 10ppm toluene
6814046
Test gas 58 l
Benzene 5ppm
6814050
Pressure reducing valve basic model 0.5 LPM; Suitable for 58L test gas cylinder 6810397
Raw & & X-pid9000/9500 Test Gas Adapter 6851850
Raw & & X-pid9000/9500 outer box 6851851
Polyethylene sampling hose, including PTFE lined hose
Length (3 meters); Outer diameter: 8 millimeters; Inner diameter: 4.8 millimeters; Wall thickness: 1.6 millimeters
8326980
Polyethylene sampling hose, including PTFE lined hose
Length (15 meters); Outer diameter: 8 millimeters; Inner diameter: 4.8 millimeters; Wall thickness: 1.6 millimeters
4594679
Sampling hose FKM (resistant to organic solvents)
Outer diameter: 6.4 millimeters; Inner diameter: 3.2 millimeters; Wall thickness: 1.6 millimeters
8325837
Dustproof and waterproof filtration membrane, including hose adapter 8319364
Dustproof and waterproof filtration membrane, without hose adapter 8319359
Expansion probe ES 150
Maximum length of 150 centimeters, including FKM sampling hose extension tube
8316533
Rod probe 90
Length: 90 centimeters, including FKM sampling hose extension tube
8316532
Floating ball probe, excluding hose 6802337