Online DMSO concentration analyzer supports non-standard customization without pre-processing

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The online DMSO concentration meter has high measurement accuracy and can output results in 2-3 seconds. The instrument has a compact structure and simple operation, and can monitor DMSO concentration in real-time 24 hours a day. It has factory linear calibration and automatic temperature compensation functions, as well as online prism automatic cleaning function.

Product Details

Product Introduction

The control of DMSO concentration in carbon fiber coagulation bath has always been a focus of attention for production enterprises. Excessive or insufficient concentration can lead to structural defects in the precursor fibers, ultimately affecting the mechanical properties of carbon fibers. Many companies are still using manual timed sampling and laboratory refractometer readings, which have the following pain points:

Sampling and obtaining results takes more than 30 minutes, during which production continues. When deviations are discovered, a large number of non-conforming products have already been produced.

The concentration distribution in the coagulation bath is uneven, and the results vary greatly depending on the sampling location.

The manual operation is affected by the environment and proficiency, resulting in poor data consistency.

Unable to achieve automatic closed-loop adjustment, adding DMSO or water depends entirely on experience.

Online DMSO concentration meterProvided a complete solution. The instrument can be directly installed on the coagulation bath circulation pipeline to detect the concentration of DMSO solution in real time, and transmit the data to the central control system in 4-20mA or RS485 signals.

Product Advantages

Fast response: Multiple measurements per second, adjustable output refresh rate, and immediate capture of concentration fluctuations.
High precision: The concentration measurement accuracy can reach ± 0.1%, with a resolution of 0.01%, meeting the requirements of carbon fiber production process.
Stable and reliable: There are no moving parts during the detection process, and the sapphire prism has high hardness, scratch resistance, and is suitable for liquids containing impurities.
Automatic temperature compensation: Equipped with a built-in temperature sensor to eliminate the impact of temperature changes on refractive index.
Easy integration: Standard analog and digital communication interfaces seamlessly integrate with existing control systems.
Flexible installation methodSupports thread, flange, and chuck connections. The automatic cleaning function can set the cleaning cycle according to the on-site situation, ensuring that long-term measurements do not drift.

technical parameters

Product Model	CYR-G-DMSO
measurement project	Refractive index, temperature, concentration
measurement range	0 - 50%
resolution	0.01%
measurement accuracy	± 0.1%
measure temperature	-20 to 100 ℃
temperature compensation	0-100°C
Process temperature	-20°C up to +100°C
prism material	Optical grade sapphire
Liquid contact material	316L optional: Hastelloy C-276, 2205, 20 alloy, titanium, tantalum, etc
input power	DC24V
signal output	DC4 to 20mA&RS485; 2-channel switch signal output
protection level	IP65
Process pressure	≤ 1 MPa (10 Bar), higher pressure levels can be customized
Size and Weight	￠ 109 * 138mm/approximately 1.87KG
Cleaning options	Optional automatic cleaning component
Installation Options	Chuck, flange pipe adapter, small diameter adapter, material: 304, 316L, 2205, PP or steel lined fluorine
Other functions	The operation panel can view data such as concentration, temperature, refractive index, etc., and supports functions such as fault code prompt, one click zero calibration, and factory reset