Non standard specification constant temperature and humidity test chamber used for medical device products

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Non standard constant temperature and humidity test chamber is used for medical device products. Scope of application: Designed specifically for medical devices, it can be used for stability testing, environmental reliability testing, accelerated aging testing, long-term storage simulation testing, etc. of vascular intervention devices, implantable medical devices, medical consumables, diagnostic equipment, etc. It can also be adapted to relevant testing needs in the pharmaceutical, biotechnology and other fields

Product Details

1Non standard specification constant temperature and humidity test chamber used for medical device productsBasic specification parameters：

parameter item	technical indicators
model	ADX-TH-1500D (non-standard customized version)
internal volume	1500L (precise adaptation to large medical devices and batch sample testing)
Inner container size（W×D×H）	1320 × 750 × 1520mm (can be adjusted according to non-standard medical device dimensions)
External dimensions（W×D×H）	1780 × 1030 × 1865mm (including base and heat dissipation structure)
Standard pallet quantity	2layer SUS304 stainless steel shelf, adjustable spacing
power supply voltage	AC 380V 50Hz
installed power	15.5KW
operating power	about900W (energy-saving design, suitable for long-term continuous testing)
Work environment requirements	ambient temperature5 ℃~30 ℃, relative humidity ≤ 85% RH, no strong vibration or dust

IINon standard specification constant temperature and humidity test chamber used for medical device productsTemperature and humidity control parameters：

parameter item	technical indicators
Temperature control range	Non-standard customization -40 ℃~100 ℃ (conventional range -5 ℃~70 ℃, can be extended to -70 ℃~150 ℃ as needed)
Moisture control range	Non-standard customization 10% RH to 95% RH (conventional range 15% RH to 95% RH, both low and high humidity can be accurately controlled)
temperature resolution	0.1℃
temperature fluctuation	± 0.2 ℃ (unloaded, 25 ℃/60% RH standard operating conditions)
Temperature Uniformity	± 0.5 ℃ (multi-point testing inside the box, meeting the uniformity requirements for medical device testing)
Humidity fluctuation	± 1% RH (unloaded, 25 ℃/60% RH standard operating conditions)
heating rate	0 ℃~100 ℃, 3 ℃/min (unloaded, customizable high-speed heating scheme)
降温速率	100 ℃~0 ℃, 1 ℃/min (unloaded, using imported refrigeration system, stable cooling without overshoot)
Temperature and humidity control method	Microcomputer fuzzyPID control, programmable with 30 segments and 99 cycle times, supporting gradient and slope control

3、 Core system configuration：

System Category	Configuration Details
refrigeration system	Imported fully enclosed compressor Taikang, hot gas bypass energy regulation technology; Forced air cooling condensation,R404A and R23ANon fluorine environmentally friendly refrigerant, dehumidification adopts evaporator coil dew point dehumidification method, key components such as solenoid valve and drying filter are all imported
Heating and humidification system	Far infrared nickel alloy high-speed heating electric heater, with uniform and stable heating; External boiler steam humidifier with automatic water replenishment and recycling design, water-saving and worry free, stable humidification without scaling
circulatory system	Diffusion type new air duct, high, medium, and low speed adjustable fans, forced convection (balanced), ensuring temperature and humidity uniformity inside the box; Independent ventilation fan to promptly dissipate the operating heat of the equipment
control system	7-inch color touch screen, real-time display of temperature and humidity, fan speed, running time and other parameters; Supports USB interface, RS485 interface, can be connected to printers or computers to achieve data recording, export, and remote control; Equipped with parameter memory and automatic power-off recovery function

4、 Box structure and material：

Structural parts	Material and Design Details
inner liner	ImportSUS304 mirror stainless steel, with a four corner arc design, easy to clean and corrosion-resistant, meeting the cleanliness requirements for medical device testing
outer box	High quality cold-rolled steel plate+Powder spraying treatment, uniform thickness, beautiful and durable, scratch resistant
insulation layer	Three layer high-density polyurethane insulation material, thickness100mm， Thermal insulation performance meets international standards, effectively reducing energy consumption
box door	Double layer design (outer cold-rolled steel plate sprayed with plastic)+Inner tempered glass with strong sealing properties; Glass inner door with electronic defrosting film, equipped with auxiliary lighting, easy to observe and does not affect temperature and humidity
Base and casters	Rectangular square steel integrated welded base with high strength; Polyurethane universal casters, with steering lock, easy to move and wear-resistant
test hole	Standard configuration on the left side of the boxΦ 50mm test hole, equipped with silicone soft plug, convenient for external monitoring equipment, isolated from air convection