New water bath constant temperature oscillator with transparent glass cover

New water bath constant temperature oscillator with transparent glass cover

1、 Product Introduction:

New water bath constant temperature oscillator with transparent glass cover(also known as water bath constant temperature oscillator) is a biochemical instrument that combines a temperature controlled constant temperature water bath and an oscillator. It is mainly suitable for the oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in various universities, medical, petrochemical, health and epidemic prevention, environmental monitoring and other scientific research departments.

3、 Main features:

1The large screen LCD instrument displays time, temperature, and speed.

2The constant temperature instrument maintains stable temperature control.

3When oscillating, there are small waves, but no splashing waves.

4Digital setting of oscillation frequency (constant speed).

5It has a memory function for incoming calls after power failure.
6Stainless steel universal spring fixtures are particularly suitable for the cultivation and preparation of biological samples for various comparative experiments.
7Smooth operation, easy and safe operation.
8The inner cavity is made of stainless steel, which has good corrosion resistance.

4、 Technical parameters:

5、 Usage:

1The instrument should be placed on a sturdy workbench, with a clean and tidy environment, ventilation and dryness, and convenient water supply and drainage.

2It is best to turn off the power switch before using the instrument.

3Packing culture test bottles: Pay attention to even distribution

Pay attention to not filling too little liquid to prevent shaking of the test bottle.

Pay attention to sealing the bottle mouth to prevent water droplets from dripping into the test bottle.

4Connect the external power supply, turn on the power switch, and the indicator light will turn on.

5、Select constant temperature:

When using, pay attention to adding water first, so that the heating tube is completely submerged in water. The amount of water added should be determined according to the required amount, but it is never allowed for the heating tube to be exposed outside the water. Try to put the water in as much as possible2/3At the water tank,Power on,Close the power switch,At this time, the temperature displayed on the digital display is the indoor temperature. Then set the instrument

6, Press“TIMER”Enter the temperature setting interface,press▲Set the temperature and add,press▼Set the temperature to decrease, after setting the temperature,Press again“TIMER”Exit the settings interface.

7, Press“TEMP”Enter the time setting interface and press▲Add to the set time,press▼Set time reduction, after setting the time,Press again“TEMP”Exit the settings interface.

8, Press“SPPED”Enter the speed setting interface,press▲Set the temperature and add,press▼Set the temperature to decrease, after setting the temperature,Press again“SPPED”Exit the settings interface.

9After setting all parameters, press once“RUN”The instrument starts working. If you need to stop working in advance, press again“STOP”Just enough.

10Before each shutdown, all switches should be in a non working state and the power should be cut off.