FSH-2A adjustable high-speed homogenizer (disperser)

FSH-2AAdjustable high-speed homogenizer (disperser)

1、 Product Introduction:

FSH-2A adjustable high-speed homogenizer (disperser)Also known as high-speed disperser, it has a reasonable design, novel structure, uses high-quality high-speed motor, continuously variable speed, is equipped with a voltage stabilization system, and stable speed display. The instrument has the characteristics of high power, low noise, and safe operation, providing a basic equipment for various universities, research institutions, chemical laboratories, tissue cell crushing, homogenization, and various liquid-phase chemical reactions. The instrument adopts a controllable silicon high-speed regulation system, and the Hall element speed measurement adopts an electronic circuit with clear digital display, making it easy to use.

2、 Technical parameters:

1. Motor speed: 20000 revolutions per minute (large homogenizer blade: 8000-18000 revolutions per minute)

Small homogenizer knife: 8000-20000 revolutions per minute) for speed display.

2. Motor power: 300W, continuous working time ≤ 5 minutes

3. Power supply: 220V 50HZ

4. Weight: 5Kg

3、 Usage:

The instrument should be placed on a horizontal workbench, and the required homogenizing tools must be installed in place. When connecting the power to test the machine, first use a cup or vessel filled with water to submerge the plum blossom blade in the water. Turn on the power switch, adjust the speed knob slowly to quickly, and there should be no obvious metal friction sound (if there is a metal friction sound, turn off the power, loosen the 6M/M support screw of the supporting tool, randomly turn the external fixing sleeve upwards and install it in place, and then tighten it) before it can work. Cut the plants or microorganisms that need to be tested into small pieces or small pieces, place them in a randomly equipped glass container, clamp them in the middle of a magnet bracket (seven shaped), loosen the 8M/M fastening screw that fixes the motor base, slowly align with the mouth of the container and move downwards, so that the homogenizer head is 2-3mm away from the bottom of the container, and then tighten the 8M/M screw.

4、 Instrument maintenance:

After long-term use, the polytetrafluoroethylene inside the high-speed disperser tool is a vulnerable component for users to replace. Attention: After each work is completed, remove the cutting tools and rinse them with clean water to dry.