Nengyan 7017 type 2-position 3-all solenoid valve

Nengyan 7017 type 2-position 3-all solenoid valve

sizematerialFKM seals, EPDM valve bodies, polyphenylene sulfide (PPS)weightPush in valve body1.)154 g flange valve body1.)140 g diameter DN 3 and DN 4 circuit function T (universal). Insulation grade of electromagnetic coil: Epoxy resin coil, H-gradeperformance dataRated operating mode/single valve 50% ED/2 minutes (at maximum+65 ° C ambient temperature) (switch performance limited at 100% ED) switching time2.)Diameter 3.0 mm: Open/Close 25 msElectrical parametersWorking voltage 24 V/DC nominal power 11 W voltage tolerance ± 3%medium parametersWorking medium neutral and corrosive gases and liquids (such as air, water, coffee, milk) medium temperature+5 ° C~+80 ° C viscosity maximum 21 mm2/sProcess interface/pipeline interface and communicationElectrical connection flat plug (6.3 x 0.8) as a Class III protection level equipment pipeline interface flange push in valve body (hose outer diameter 6 mm)

Nengyan 7017 type 2-position 3-all solenoid valve

Direct acting rocker arm valve isolated from the medium, used for quantitative addition, filling, mixing, and distribution of neutral and corrosive liquids and gases. The medium only comes into contact with the casing and sealing material. It adopts mature rocker arm technology, with tight back pressure sealing, good flushing performance, and small internal volume. The maintenance concept adopted by the valve allows for quick opening without the need for tools for inspection and replacement of isolation membranes if necessary. You can release the electromagnetic coil and align it in any direction. The 7017 model has many versions and is suitable for fluid applications due to its various housing options. This valve series includes NSF169 certification and complies with EGV1935/2004 and FDA requirements. These valves meet the requirements of protection level IP20

Two position three-way rocker valve with universal circuit function, maximum DN4