Needle tip cone roughness meter measuring needle 9057493

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

MarSurf RD 26 driver with sensors: $r $nRD26 driver with built-in touch plane suitable for precise measurement of 25.4 mm (1 inch), Rz residual value Lt; 30 nm (probe speed 0.1 mm/s) $r $n can be used for horizontal/vertical/inverted measurements $r $n Electric height adjustment, automatic zeroing $r $n Driver measurement length 26 mm

Product Details

Needle tip cone roughness meter measuring needle 9057493

Probe arm LP T 15-20-25/30°

Order No. 9057493 (old LD 120 Order No. 9049116)

Spare needle: order no. 9049117

Entire length up to turning point : 200 mm

Length up to probe mount: 173 mm

Stylus length below the probe arm : 5.0 mm

Measuring range: 26 mm

Probe tip radius / material: 25 µm /

tungsten carbide ø 0.5 mm

Opening angle of the probe tip: cone 30°

Can be used for:

Twin contour measurement on bore sealings

Bores ø 15,0 mm up to measuring depth 148,0 mm

Probe arm LP T 15-20-25/30 °

Order number 9057493 (old LD 120 order number 9049116)

Spare needle: Order number 9049117

Total length to turning point: 200 millimeters

Length of probe installation location: 173 millimeters

Pin length below probe arm: 5.0 millimeters

Measurement range: 26 millimeters

Probe tip radius/material: 25 microns/

Tungsten carbide ø 0.5mm

Opening angle of probe tip: conical, 30 °

Can be used for:

Measurement of pairing profile of channel seals

Aperture ø 15.0 mm, measuring depth up to 148.0 mm