Needle tip 25 μ m roughness meter measuring needle 9055963

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Mal roughness meter is equipped with a thermal printer to output contours and results, ensuring the quality of the result document. The driver unit has an automatic zero setting function, and the setting time only takes a few seconds

Product Details

Needle tip 25 μ m roughness meter measuring needle 9055963

Probe arm LP T 6-15-25/19 °

Order number 9055963 (old LD 120 order number 9046410)

Total length to turning point: 150 millimeters

Length of probe installation location: 123 millimeters

Pin length below probe arm: 2.0 millimeters

Measurement range: 19.5 millimeters

Probe tip radius/material: 25 microns/tungsten carbide

Opening angle of probe tip: 19 °

Can be used for:

Measurement of pairing profile of channel seals

Aperture of 6.0 millimeters, measurement depth can reach 24.0 millimeters

Aperture 7.0 millimeters, maximum measurement depth 98.0 millimeters

Probe arm LP T 6-15-25/19°

Order No. 9055963 (old LD 120 Order No. 9046410)

Entire length up to turning point : 150 mm

Length up to probe mount: 123 mm

Stylus length below the probe arm : 2.0 mm

Measuring range: 19.5 mm

Probe tip radius / material: 25 µm / tungsten carbide

Opening angle of the probe tip: 19°

Can be used for:

Twin contour measurement on bore sealings

Bores ø 6,0 mm up to measuring depth 24.0 mm

Bores ø 7,0 mm up to measuring depth 98.0 mm