LP T 2.8-15-2/60° -s30° Roughness measuring needle 9055462

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-definition color display screen of the roughness meter operation interface is simple, clear, and easy to understand. Although the standardized measurement point density has been increased, the measurement speed has been improved. The new international standards ISO, JIS, ASME commonly use roughness parameters and multiple languages

Product Details

LP T 2.8-15-2/60 ° - s30 ° roughness measuring needle 9055462

Probe arm LP T 2.8-15-2/60 ° - s30 °

Order number 9055462, old LD 120 Order number 9043015)

Total length to turning point: 150 millimeters

Length of probe installation location: 123 millimeters

Pin length below probe arm: 0.4 millimeters

Measurement range: 19.5 millimeters

Probe tip radius/material: 2 microns/diamond

Probe tip opening angle: 60 °/tiltable 30 °

Can be used for:

Measurement of pairing profile of channel seals

Aperture 2.8 millimeters, measurement depth up to 75.0 millimeters

Aperture 5.0 mm, measuring depth up to 98.0 mm

Probe arm LP T 2.8-15-2/60°-s30°

Order No. 9055462 old LD 120 Order No. 9043015)

Entire length up to turning point : 150 mm

Length up to probe mount: 123 mm

Stylus length below the probe arm : 0.4 mm

Measuring range: 19.5 mm

Probe tip radius / material: 2 µm / diamond

Opening angle of the probe tip: 60° / inclined 30°

Can be used for:

Twin contour measurement on bore sealings

Bores ø 2,8 mm up to measuring depth 75,0 mm

Bores ø 5,0 mm up to measuring depth 98,0 mm